Revel PerformaBe F226Be Loudspeaker
Owner’s Manual
9
CARING FOR YOUR LOUDSPEAKERS
GRILLES
Revel PerformaBe speakers feature grilles with a magnetic attachment method that
eliminates unsightly attachment hardware from the speaker baffle, so if you decide to use
your speakers with the grilles removed they will retain their elegant appearance.
F226Be
When installing the grilles on the F226Be speakers, orient them so that the “TOP” markings
(embossed in the rears of the grille frames) are towards the tops of the speaker cabinets.
CABINET FINISH
The cabinet’s wood veneer or lacquer finish does not require routine maintenance. Cabinet
surfaces that have been marked with dust, fingerprints, or other dirt can be cleaned using
a soft cloth – preferably micro-fiber, and high quality auto wax. Take care not to come in
contact with the transducers.
• To clean the grille, gently vacuum it using a soft-bristled brush vacuum attachment with
the vacuum cleaner set to the lowest possible suction.
CAUTION:
To prevent cabinet damage, do not use a cloth made with steel wool or metal
polish to clean the cabinet. To prevent possible transducer damage, do not apply furniture
polish directly to the cabinet.
CAUTION: BERYLLIUM TWEETER CAUTION
Beryllium dust is a hazardous material. The Revel PerformaBe Beryllium dome will not
emit any dust under normal circumstances and is perfectly safe unless it is damaged. The
tweeter dome is protected by the acoustic lens and waveguide. As long as the waveguide
remains intact there is no cause for concern. In the unlikely event that the dome is
damaged in any way, cover the tweeter with adhesive plastic tape and contact Revel for
further instructions. Do not play the speaker if it has a damaged tweeter dome.
At the end of the speaker’s life do not dispose of it in a landfill or incinerator. Bring the
speaker to an appropriate recycling or hazardous waste disposal site. Please contact
Revel customer service for more information about proper disposal.
SPECIFICATIONS
Type:
3-way dual 6.5" floorstanding loudspeaker
Low-frequency transducer: Two 6.5" (165 mm) Deep Ceramic Composite aluminum cones,
with cast frames
Midrange transducer:
5-1/4" (130 mm) Deep Ceramic Composite aluminum cone,
with cast frame
High-frequency transducer: 1" (25 mm) Beryllium dome, with acoustic lens waveguide
Recommended amplifier
power range:
50 – 200 watts
Frequency response:
44 Hz – 40 kHz (-6 dB)
Low-frequency extension:
38 Hz (-10 dB); 44 Hz (-6 dB); 50 Hz (-3 dB)
Nominal impedance:
8 ohms
Sensitivity (2.83 V / 1 m):
88 dB
Crossover frequencies:
260 Hz; 2.1 kHz
Enclosure type:
Bass-reflex via front-mounted port
Inputs:
Dual gold-plated binding posts with shorting straps
Available finishes:
High gloss piano black, white, metallic and walnut
Dimensions
(W x D x H, grille included): 9.8” x 13.7” x 41.3” (249 x 347 x 1050 mm)
Cabinet Weight:
58.0 lb (26.4 Kg)
Grille Weight:
0.8 lb (0.4 Kg)
LIMITED WARRANTY
Revel loudspeakers are warranted against defects. The duration of a warranty depends on
the laws in the country in which it was purchased. Your local Revel retailer can help you
determine the duration and coverage of your warranty.
For more information please visit: REVELSPEAKERS.COM
Please visit REVELSPEAKERS.COM for additional language support on the user manual.
Veuillez visiter REVELSPEAKERS.COM pour obtenir le mode d’emploi en d’autres langues.
Если вам требуется дополнительные версии руководства пользователя на других языках, посетите сайт
REVELSPEAKERS.COM.
別の言語に対応したユーザーマニュアルを読むには、
REVELSPEAKERS.COMにアクセスしてください。
사용자 설명서에 대한 추가 언어 지원은 REVELSPEAKERS.COM에서 확인하십시오
请访问 REVELSPEAKERS.COM
以获取其他语言版本的用户手册。
Visita REVELSPEAKERS.COM para obtener el manual de usuario de soporte en idiomas
adicionales.
Weitere Sprachfassungen der Bedienungsanleitung findest Du unter REVELSPEAKERS.COM.
Revel PerformaBe F226Be Loudspeaker_OM_V4.indd 9
8/29/2019 12:01:13 PM
