Harman P43 Скачать руководство пользователя страница 22

Harman®  •  P-Series Owner’s Manual_R23  •  2014 - ___  •  02/19

22

3-90-436168c

Reference Material 

 

A. Safety Reminders

When operating your Harman

®

 P-Series Pellet Stove, respect 

basic safety standards. Read these instructions carefully 

before you attempt to operate the P-Series Pellet Stove. 

Failure to do so may result in damage to property or personal 

injury and may void the product warranty.

CAUTION: This appliance must be vented to the outside.

Due to high temperatures, this stove should be placed out of 

traffic and away from furniture and draperies.

Children and adults should be alerted to the hazards of high 

surface temperatures and should stay away to avoid burn 

to skin and/or clothing.
Young children should be carefully supervised when they are 

in the same room as the stove.

Clothing and other flammable materials should not be placed 

on or near this stove.
Installation and repair of this stove should be done by a 

qualified service person. The appliance should be inspected 

before use and at least annually by a qualified service person. 

More frequent cleaning will be required. It is imperative that 

control compartments and circulating air passageways of 

this stove be kept clean.

Disposal of ashes

: Ashes should be placed in a metal 

container  with  a  tight  fitting  lid.  The  closed  container  of 

ashes should be placed on a non-combustible floor or on the 

ground, well away from all combustible materials, pending 

final disposal. If the ashes are disposed of by burial in soil 

or otherwise locally dispersed, they should be retained in 

the closed container until all cinders have thoroughly cooled.

Soot and fly ash: 

Formation and need for removal. The 

products  of  combustion  contain  small  particles  of  fly  ash. 

The fly ash will collect in the exhaust venting system and will 

restrict the flow of the flue gases. Pellet fuels have different 

ash contents depending on what type of wood has been used 

to make the pellets. 

We recommend to clean the system 

after approximately 1 ton of pellets have been burned and 

judge from that how often the stove should be cleaned, 

remember if you change pellets it may change how often 

you have to clean your stove. 

When burning wood slowly, the potential exists for creosote 

to form. The venting system should be inspected periodically 

throughout the heating season to determine if a creosote 

buildup has occurred. If a significant layer of creosote 

has accumulated (3mm or more), it should be removed to 

reduce the risk of a chimney fire. If a fire occurs, call the 

fire  department,  shut  down  the  stove,  and  evacuate  the 

residence. Before using the appliance, have the venting 

system thoroughly inspected and replace any damaged 

components.

CAUTION

!

THE STRUCTURAL INTEGRITY OF THE MOBILE 

HOME FLOOR, WALL, AND CEILING/ROOF MUST BE 

MAINTAINED.

CAUTION

!

THE STOVE IS HOT WHILE IN OPERATION.
KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. 

CONTACT MAY CAUSE SKIN BURNS.

WARNING

!

USE OF IMPROPER FUELS, FIRESTARTERS OR 

ALTERING THE STOVE FOR HIGHER HEAT OUTPUT 

MAY CAUSE DAMAGE TO THE STOVE AND COULD 

RESULT IN A HOUSE FIRE. USE ONLY APPROVED 

FUELS AND OPERATION GUIDELINES

WARNING

!

KEEP COMBUSTIBLE MATERIALS SUCH AS GRASS, 

LEAVES, ETC. AT LEAST 3 FEET AWAY FROM THE 

POINT DIRECTLY UNDER THE VENT TERMINATION.

WARNING

!

MOBILE/MANUFACTURED HOME GUIDELINES DO 

NOT ALLOW INSTALLATION IN A SLEEPING ROOM.

Содержание P43













































Отзывы: