background image

Harman®  •  P-Series Owner’s Manual_R10  •  2014 - ___  •  11/15

2

3-90-436168c

Listing Label Information/Location

A. Congratulations

Congratulations on selecting a Harman

®

 Freestanding Pellet 

Stove. The Harman

®

 P-Series pellet stove you have selected 

is designed to provide the utmost in safety, reliability, and 

efficiency.
As the owner of a new pellet stove, you’ll want to read and 

carefully follow all of the instructions contained in this owner’s 

manual. Pay special attention to all cautions and warnings.

This 

owner’s manual

 

should be retained for future reference. 

We  suggest  that  you  keep  it  with  your  other  important 

documents and product manuals.
Your new Harman

®

 P-Series Freestanding Pellet Stove will 

give you years of durable use and trouble-free enjoyment. 

Welcome to the Harman

®

 family!

The model information regarding your specific stove can be found on 

the rating plate usually located in the control area of the stove.

Read this manual before operating this appliance. 

Please retain this Owner’s Manual for future reference.

Read the Installation Manual before making any installation or finishing changes.

Welcome  

Brand: ________________________________________________

Model Name:

 ___________________________

Serial Number:

 __________________________________________

Date Installed:

 __________________________

Appliance Information:

Local Dealer Information

DEALER: 

Fill in 

your name, address, 

phone and email 

information here and 

appliance information 

below.

Dealer Name: ________________________________________________________

Address: ____________________________________________________________

               ____________________________________________________________

Phone:   _____________________________________________________________

Email:    _____________________________________________________________

P.N. 3-90-04300

Made in U.S.A. of US and imported parts. / Fabriqué

aux États-Unis-d’Amérique par des pièces d’origine

américaine et pièces importées.

BARCODE LABEL

008

Serial No.

N

o

 de série:

Report #/ Raport #

135-S-23-4, 135-S-23b-6.2

Tested to / Testé à:

 ASTM E 1509-04, 

ULC-S627-00, EPA Method 28 & 5G

MODEL / MODÈLE: “P43”

Room Heater Pellet Fuel-Burning Type

SUITABLE FOR MOBILE-HOME INSTALLATION

This pellet burning appliance has been tested and listed for use in

Manufactured Homes In accordance with OAR 814-23-900 through 814-23-909

Rev G

MINIMUM CLEARANCES TO COMBUSTIBLES/ DISTANCES DE 

SECURITE PAR RAPPORT AUX MATERIAUX COMBUSTIBLES:

Back Wall / Entre Mur Arrière  2”/ 51mm 

2”/ 51mm

Side Wall / Entre Paroi Latér  16”/ 406mm  10”/ 254mm

CORNER INSTALLATION / EN ANGLE

Walls to Appliance  / 

9”/228mm 

9”/228mm

Entre Murs et appareil

FLOOR PROTECTION / Protection Du Plancher

  

USA

 

Canada

Sides*/Côtés  (A) 

6” 

200mm

Back**/Arrière  (B) 

6” 

200mm

Front*/Avant  (C) 

6” 

450mm

**Measured from pedestal base in the US ONLY

**Mesuré à partir de la base du socle aux États-Unis uniquement

*Measured from Glass Opening 

US ONLY

*Mesurer à partir de la surface de la porte en verre 

CANADA ONLY

Floor Protection Must Be a Non-Combustible Material. Must Also be 

Place Under Any Horizontal Flue Connector, Extending 2” or 51mm 

Beyond the Pipe Measurement.

Pour protéger le plancher, il faut sous le pêole un matériau. Qui doit 

aussi être placé sous les parties horizontales du tuyau de raccord à la 

cheminée et s’étendre à 51mm ø 2 po. au-delà de la mesure du tuyau.

Without

Side Shields
Sans Écrans

Latéraux

With

Side Shields
Avec Écrans

Latéraux

2"(51mm)

10" (254mm) with side shields

16" (406mm) w/out side shields

9”(228mm) 

9"(228mm)

PRotection De Sol

FlooR PRotection

A

cAn

A

USA

c

B

F

loor

 

protector

352 Mountain House Road

Halifax, PA 17032

ECO:  77540
PARt # / REv:  3-90-04300_Rev G
ORiGinAtOR:  Spidlet
DAtE:  04/15
LAbEL SizE:  4-3/8” H. x 10-3/4” W
LOCAtiOn: 

Hopper - top Rear

CLASS: 
ADHESivE: 486
MAtERiAL: MEtAL
ink: bLACk
OvERCOAt:

LAbEL tiCkEt

Corners .062

Room Heater, Pellet Fuel-Burning Type, Also For Use In Mobile Homes. (UM) 84-HUD

“PREVENT HOUSE FIRES”

 Install and use only in accordance with manufactures 

installation and operation instructions.

This wood heater needs periodic inspection and repair for proper operation. Consult 

the owner’s manual for further information. It is against federal regulations to operate 

this wood heater in a manner inconsistent with the operating instructions in the owner’s 

manual.

Contact local building or fire officials about restrictions and installation inspection in 

your area.

WARNING: FOR MANUFACTURED HOMES:

 Do not install appliance in a sleeping 

room. An outside combustion air inlet must be provided. The structural integrity of the 

manufactured home floor, ceiling and walls must be maintained.

Refer to manufacturer’s instructions and local codes for precautions required for 

passing chimney through a combustible wall or ceiling. Inspect and clean exhaust 

venting system frequently in accordance with manufacturer’s instructions.

Use a 3” or 4” diameter type “L” or “PL” venting system.

Do not connect this unit to a chimney flue servicing another appliance.

Do not obstruct the space beneath the heater.

FOR USE WITH PELLETIZED WOOD FUEL ONLY.

Input Rating Max: 5.5 lb. fuel/hr

EPA Certified Emissions: 1.3 g/hr

U.S. Electrical Rating: 115 VAC, 60 Hz, Start 4.2 AMPS, Run 2.8 AMPS

Fuel Type: Wood Pellet.

Route power cord away from unit.

OPERATE ONLY WITH DOORS CLOSED

DANGER:

 Risk of Electrical Shock. Disconnect Power Before Servicing Unit.

For Further Instruction, Refer To Installation and Owner’s Manual.

Replace glass only with 5mm mirrored ceramic available from your dealer.

DO NOT REMOVE THIS LABEL / NE PAS ENLEVER CETTE ÉTIQUETTE

Chauffe-chambre, Pellet à combustibles Type, également pour les maisons mobiles. (UM) 84-HUD

“EMPêCHER MAISON INCENDIES”

 Installer et utiliser uniquement en conformité avec les instructions 

du fabricant d’installation et d’exploitation.

Ce poêle à bois doit inspection périodique et la réparation pour un fonctionnement correct. Consultez le 

manuel du propriétaire pour plus d’informations. Ce est contre les règlements fédéraux pour faire fonctionner 

ce poêle à bois d’une manière incompatible avec les instructions d’utilisation dans le manuel du propriétaire.

Contactez le service des incendies à propos des restrictions et l’inspection d’installation dans votre région.

AVERTISSEMENT: POUR MAISONS PRÉFABRIQUÉES:

 Ne pas installer l’appareil dans une chambre à 

coucher. Une entrée d’air de combustion à l’extérieur doit être fournie. L’intégrité structurale de la maison 

étage, plafond et murs fabriqués doit être maintenue.

Reportez-vous aux instructions du fabricant et les codes locaux pour les précautions nécessaires pour 

faire passer la cheminée à travers un mur ou un plafond combustible. Inspectez et nettoyez système 

d’évacuation souvent en conformité avec les instructions du fabricant.

Utilisez un “ou 4” Type de diamètre «L» 3 ou le système de ventilation “PL”.

Ne pas connecter cet appareil à un conduit de cheminée desservant un autre appareil.

Ne pas obstruer l’espace sous le chauffe-eau.

À UTILISER AVEC LA GRANULE DE BOIS SEULEMENT.

Entrée Max Note: £ 5,5 carburant / h

Émissions certifiés EPA: 1,3 g / h

US Note électrique: 115 VAC, 60 Hz, Start 4,2 AMPS, Run 2,8 AMPS

Type de carburant: granulés de bois.

Route cordon électrique de l’appareil.

Fonctionner uniquement avec les portes fermées

DANGER:

 Risque de choc électrique. Débranchez l’alimentation avant l’Unité des services.

Pour de plus amples instructions, reportez-vous à l’installation et le manuel du propriétaire.

Remplacer le verre seulement avec 5mm miroir en céramique disponibles chez votre revendeur.

Ne ENLEVEZ PAS CETTE ÉTIQUETTE / NE PAS CETTE ÉTIQUETTE enlever

US ENVIRONMENTAL PROTECTION AGENCY

Certified to comply with 2015 particulate emission standards. Not approved for sale after May 15, 2020.

Certifié conforme aux normes 2015 d’émission de particules. Non approuvé pour la vente après le 15 mai 2020.

Date of Manufacture / Date de fabrication:

2015   2016   2017   JAn   FeB   MAR   APR   MAY   JUn   JUl   AUG   SeP   oct   noV   Dec

Manufactured by / Fabriqué par: Hearth and Home Technologies 352 Mountain House Road, Halifax PA 17032

Serial Number

Model Name

EXAMPLE

Содержание P43











































Отзывы: