manualshive.com logo in svg

Harman Martin VDO Fatron 20, Руководство пользователя

Поделиться
Скачать
Harman Martin VDO Fatron 20 Скачать руководство пользователя страница 45

Specifications

 45

Specifications

Physical

VDO Fatron 20, 320 mm model

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320 mm (12.6 in.)
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 mm (3.15 in.)
Height without front  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 mm (1.10 in.)
Height with standard front (Square Diffuser) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 mm (1.89 in.)
Weight without front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  0.85 kg (1.9 lbs.)
Weight with standard front (Square Diffuser). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  0.95 kg (2.1 lbs.)

VDO Fatron 20, 1000 mm model

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000 mm (39.4 in.)
Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 mm (3.15 in.)
Height without front  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 mm (1.10 in.)
Height with standard front (Square Diffuser) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 mm (1.89 in.)
Weight without front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2.5 kg (5.6 lbs.)
Weight with standard front (Square Diffuser). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2.8 kg (6.2 lbs.)

Control and Programming

Control options. . . . . . . . . . . . . . . . . . . Martin® P3 System Controller (via Martin® P3 PowerPort) or DMX
Protocol detection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automatic
DMX control modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RGB, basic, segment and pixel-level
Setting and addressing  . . . . . . . . . . . . . . . . . . . . . . . . .  P3 System controller or RDM-compliant controller
Control resolution. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-bit (P3) or 8-bit (DMX) control of each color
Color and intensity calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pixel-level
DMX compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  USITT DMX512-A
RDM compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  ANSI/ESTA E1.20
Firmware update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Via P3 System controller

DMX channels

VDO Fatron 20, 320 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3/10/19/55
VDO Fatron 20, 1000 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/10/37/157

Signal Protocol

P3 (via Martin® P3 PowerPort) or DMX (direct)

Optics

Minimum LED lifetime  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 000 hours (to >70% luminous output)*

*Figure obtained under manufacturer's test conditions

Options

Open front
Flat Diffuser
Smoked Flat Diffuser
Round Diffuser
Smoked Round Diffuser
Square Diffuser (supplied with fixtures as standard)
Smoked Square Diffuser
NoBlend Diffuser
Smoked NoBlend Diffuser
Lens Array Narrow

All optical accessory options are interchangeable and clip onto fixtures

Control/User Interface

Device status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  Multi-color visual indication
Device test and reset . . . . . . . . . . . . . . Magnetic pushbutton to call up local test patterns and reset device

www.audiovias.com

Содержание Martin VDO Fatron 20





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды