Harman Martin VC-Dot Series, Руководство пользователя

Страница: 5 / 28

Safety Information 5
• Use only the cables and connectors specified by Martin™ to interconnect devices. If the specified cables
are not long enough for an intended cable run, consult Martin™ for assistance in finding or creating a safe
alternative cable
• Provide a means of locking out AC mains power that allows power to the installation to be shut down and
made impossible to reapply, even accidentally, during work on the installation.
• Shut down power to the installation during service and when it is not in use.
• Before applying power to the installation, check that all power distribution equipment and cables are in
perfect condition and rated for the current requirements of all connected devices.
• Isolate the installation from power immediately if a product, power cable or connector is in any way
damaged, defective or wet, or if it shows signs of overheating.
Protection from burns and fire
• Provide free airflow and a minimum clearance of 10 mm (0.4 in.) around the front of VC-Dots.
• Do not operate the VC-Dots™ system if the ambient temperature (Ta) exceeds 55° C (131° F).
• Do not bend the VC-Dots™ system ribbon cable into a curve with a radius less than 26 mm (1 in.).
• Do not modify the VC-Dots™ system in any way not described in this manual or install other than genuine
Martin™ parts. Use only accessories approved by Martin™.
Protection from injury
• When installing the VC-Dots™ system above ground level, ensure that the installation hardware and
supporting structure can hold at least 10 times the weight of all the devices they support.
• In an overhead installation or where the VC-Dots™ system may cause injury if it falls:
- block access below the work area and work from a stable platform whenever installing, servicing or
moving the VC-Dots™ system, and
- as soon as work is completed, check that all hardware and components are securely in place and
fastened to supporting structures.
www.audiovias.com