Harman Martin ERA 800 Performance, Инструкция по безопасности и установке

Страница: 11 / 32

Physical installation
11
The mounting points in the base allow omega brackets and rigging clamps to be fastened as shown in
Figure 3.
Clamping the fixture to a truss
1. Check that all rigging hardware is undamaged and can bear at least six (6) times the weight of the fixture
or as required by locally applicable regulations. Check that the supporting structure can safely bear the
weight of all installed fixtures, clamps, cables, auxiliary equipment, etc. and complies with locally
applicable regulations.
2. Bolt each rigging clamp securely to an omega bracket with an M12 bolt (minimum grade 8.8) and
self-locking nut.
Figure 3: Clamp bracket positions
Figure 4: Martin rigging hardware
Half-coupler Omega bracket for
rigging clamp rigging clamp attachment
90°
Locking quarter-
turn fasteners