Harman Martin ERA 700 Performance IP, Руководство пользователя, Страница: 5 / 66

Martin
®
ERA 700 Performance IP User Manual Rev. C 5
Introduction
Warning! Before installing, operating or servicing the ERA 700 Performance IP
lighting fixture, read the latest version of the fixture’s Safety and Installation
Manual, paying particular attention to the Safety Precautions section. The
Safety and Installation Manual is supplied with the fixture and included at the
back of this user manual.
Important! Full specifications for ERA 700 Performance IP fixtures and
accessories are available in the ERA 700 Performance IP area of the Martin®
website at www.martin.com.
Thank you for selecting the ERA 700 Performance IP lighting fixture from Martin.
This User Guide is a supplement to the Safety and Installation Manual that is supplied with the fixture
and attached to the back of this User Manual. This combined User Manual plus Safety and Installation
Manual is available for download from the ERA 700 Performance IP area of the Martin website at
www.martin.com. The User Manual contains information that is mainly of interest for lighting designers
and operators, whereas the Safety and Installation Manual contains important information for all users,
especially installers and technicians.
We recommend that you check the Martin website regularly for updated documentation. We publish
revised versions each time we can improve the quality of the information we provide and each time we
release new firmware with changes or new features. Each time we revise this guide we list any
important changes on page 2 so that you can keep track of updates.
Features
All ERA 700 Performance IP fixtures feature:
•
Long-life, high output LED
light engine
•
DMX
& network
control
•
RDM configuration and addressing
•
IP66 ingress protection rating when the supplied anti-tamper box is installed (the fixture is
suitable
for permanent or temporary outdoor or indoor use for entertainment purposes)
•
Integrated 100-240 V~, 50/60 Hz auto-ranging power supply
Before using the product for the first time
1. Check the ERA 700 Performance IP area of the Martin website at www.martin.com for the most
recent user documentation and technical information about the fixture. Martin user manual
revisions are identified by the revision letter at the bottom of the inside cover. Read the latest
revision of the ERA 700 Performance IP Safety and Installation Manual that is included at the end
of the User Manual
, paying particular attention to the ‘Safety Precautions’ section.
2. Unpack and ensure that there is no transportation damage before using the fixture. Do not attempt
to operate a damaged fixture.
3. Before operating, ensure that the voltage and frequency of the power supply match the power
requirements of the fixture.
4. If fixtures are exposed to a sudden temperature change, give them time to warm or cool to the
ambient temperature before applying power. This will help avoid damage due to condensation.