manualshive.com logo in svg

Harman Lexicon QLI-32, Руководство пользователя

Поделиться
Скачать
Harman Lexicon QLI-32 Скачать руководство пользователя страница 9

5 

THE FRONT PANEL 

 

1. ON / OFF LED Indicator

Indicator is lights Green when device is powered on.

2. STATUS LED Indicator

Lit Green when system is operating and Red when there is an error condi-
tion. Flashing green means the system is not yet ready for operation (per-
forming initialization).

3. QLI Immersive Processing Button 

Pressing the button toggles the QLI state between enabled (normal) and 
bypassed.  Button backlight is Green when QLI processing is enabled.  Not 
lit while in bypass mode.

4. MUTE Button 

Pressing the button toggles the device state between muted and unmuted. 
When the device is Muted the backlight will be red and all outputs will be 
muted.

5. Analog In Indicator

Green LED lights when 8 channel analog input is selected.

6. AES / EBU Digital In Indicator

Green LED lights when 16 channel AES/EBU input is selected.

7. BLU link In Indicator

Green LED lights when input audio is taken from the BLU link loop. 

8. Stereo Input Mode

Green LED lights when two channels of stereo input are being processed.

9. 5.1 Input Mode

Green LED lights when 6 channels (5 + LFE) of input are being processed.

10. 7.1 Input Mode

Green LED lights when 8 channels (7 + LFE) of input are being processed.

11. Signal In Indicator

 

Green LED that lights if any enabled channel (stereo, 5.1, 7.1) of the select-
ed source (analog, AES/EBU, BLU link) had a level exceeding -60 dBFS in 
the past 10 seconds.

12. BLU link Out Indicator

Green LED that lights if any output had a level exceeding -60 dBFS in the 
past 10 seconds.

1

3

5 7 8

10 10

2

4

6

9

11

Содержание Lexicon QLI-32

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды