Soundbar Top-Panel Controls and
Soundbar Rear-Panel Controls and Connections
SB 16
4
Power
Button
Surround
Mode
Button
Volume
Up/Down
Buttons
Source
Selector
Button
EQ Switch
Trim Switch
Source 2
(Coaxial Digital)
Input
Source 2
(Optical Digital)
Input
Source 1
(Analog)
Input
Wireless Code
Switch
Power
Switch
Power
Input
Soundbar Top-Panel Controls
Power Button:
When the soundbar is in the Standby mode (the Power Indicator is
amber), press this button to turn the SB 16 system on (the Power Indicator turns blue.)
NOTE: When the soundbar is in the Standby mode, it will automatically turn on whenever
it detects an audio signal at the Source 1 (analog) inputs.
When the SB 16 system is on:
s-OMENTARILYPRESSTHE0OWERBUTTONTOMUTETHE3"SYSTEM4HE0OWER)NDICATOR
flashes blue.)
s(OLDDOWNTHE0OWERBUTTONFORTHREESECONDSTOPUTTHESOUNDBARINTHE3TANDBY
mode. (The Power Indicator turns amber.) NOTE: The subwoofer will remain on for
approximately 15 minutes after the audio signal ceases and then will automatically
go into the Standby mode.
Surround Mode Button:
This button turns the SB 16 system’s 3D Surround processing
On and Off. The Surround Mode Indicator turns blue when 3D Surround is active and
turns white when 3D Surround is not active (normal stereo sound). See
Soundbar
Surround Mode Button
, on page 9, for more information.
Volume Up/Down Buttons:
Press the ( – ) button to reduce the volume; press the ( + )
button to increase the volume.
Source Selector Button:
This button switches between the sources connected to the
Source 1 (analog) and Source 2 (digital) inputs. When Source 1 is active, the Source
Indicator turns white; when Source 2 is active, the Source Indicator turns blue.
Soundbar Rear-Panel Controls and Connections
Wireless Code Switch:
Selects between four different channels for the wireless
subwoofer signal.
IMPORTANT: Be sure to set the subwoofer’s Wireless Code switch to the same
channel that you set the soundbar’s Wireless Code switch. See
Wireless Code
Switches,
on page 10, for more information.
EQ Switch:
This switch adjusts the soundbar’s bass for either wall or table mounting.
If you’re mounting the soundbar on a wall with the included wall-mount brackets, set
this switch to the
Wall
position for the most natural-sounding bass performance. If you
are placing the soundbar on a table, set the EQ switch to the
Table
position for the most
natural-sounding bass performance.
Trim Switch:
This switch adjusts the soundbar’s input sensitivity so it will work with TVs
that have different audio signal output levels. See
Soundbar Trim Switch
, on page 10, for
more information.
Source 1 Connection (analog):
Use the included stereo audio cable to connect the
stereo analog outputs of your TV, DVD player or cable/satellite tuner here.
Source 2 Connection (digital):
If your TV, DVD player or cable/satellite tuner has a
coaxial digital output, you can connect it here.
NOTE: If you connect your TV or another component to the soundbar’s Source 1
connection, you can connect a different component to the Source 2 connection.
Power Connection:
Connect the included DC power supply here. See
Power Connections,
on page 8, for more information.
IMPORTANT: Do not connect the power supply’s AC cord to an AC outlet until you
have made and verified all connections.
Power Switch:
Set this switch to the On position (press the switch’s white dot) to activate
the soundbar. In normal operation, this switch will be left in the On position. See
Turning
the Soundbar On and Off,
on page 9, for more information.
Power
Indicator
Surround
Mode
Indicator
Source
Indicator
