One step at a time...
1
. Remove stylus cover - be careful around the needle!
2
. Ensure Anti-Skate is set to 0
3
. Unclip the tonearm from the rest
4
. Ensure the arm lift is in the down position
5
. Rotate the counterweight until the arm floats (it should not go keep going up or down)
6
. Set the counterweight dial to 0 at the top (careful not to move the counterweight)
7
. With the dial at 0, rotate the counterweight 1 full turn anti-clockwise (so the counter-
weight moves toward the cartridge)
8
. Set the Anti-skate dial to 3.
BALANCE THE TONEARM
1
2
3
4
5
6
7
8
