6
To bi-wire the S4700, first remove the connector jumper bars as shown in the illustration.
A. Unscrew
all four
caps
B. Remove
jumpers
If you’re bi-wiring with a single stereo power amplifier, connect the speakers according to the following illustration.
HF/UHF
Connection
Amplifier
Right
Ch.
Left
Ch.
HF/UHF
Connection
Low-Frequency
Connection
Low-Frequency
Connection
Right
Speaker
Left
Speaker
If you’re bi-wiring with two stereo power amplifiers, connect the speakers according to the following illustration.
HF/UHF
Connection
Amplifier 1
Amplifier 2
Right
Ch.
Right
Ch.
Left
Ch.
Left
Ch.
HF/UHF
Connection
Low-Frequency
Connection
Low-Frequency
Connection
Right
Speaker
Left
Speaker
In either case, follow the instructions for the different connector types in
Basic Single-Wire Connection,
on page 4.
NOTE:
For more information about various speaker-wire and connection options, contact your local JBL dealer.
Autogoods “130”
130.com.ua
