Harman JBL PARTYBOX 100, Руководство пользователя

Страница: 13 / 15

13
www.jbl.com
English
10. TROUBLESHOOTINGS
Caution:
– Never try to repair the product by yourself. If you have any
problems while using this product, check the following points
before you request service.
System
The unit will not turn on.
• Check if the power cord is plugged into the outlet and to the
PartyBox .
• Make sure the speaker is fully charged, if not use the power
cord to turn on your speaker.
Sound
No sound from the PartyBox .
• Make sure that the PartyBox is powered on.
• Make sure that volume level is turned to an audible level.
• Make sure that it is connected to a music source.
Bluetooth
A device cannot connect with the
PartyBox
.
• Check if you enable the Bluetooth function of the device.
• The
PartyBox is already connected to another Bluetooth
device. Press and hold on Bluetooth to disconnect and pair
with a new device.
Poor audio quality from a connected Bluetooth device.
• The Bluetooth reception is poor. Move the device closer to
the PartyBox , or remove any obstacle between the device
and the
PartyBox
.
11. COMPLIANCE
The product is in compliance with the European Union energy
legislation.
Bluetooth connection mode
The product is intended to be used for streaming music via
Bluetooth connection. A consumer can stream Bluetooth
audio to the speaker. When the product is connected through
Bluetooth, the Bluetooth connection must remain active at all
times to ensure proper operation.
The product will enter into sleep mode (networked standby),
after 20 minutes without operation, the power consumption @
sleep is less than 2.0 Watts, after which it can be re-activated
via Bluetooth connection.
Bluetooth disconnection mode
The product will enter into standby mode, after 20 minutes
without operation, the power consumption @ standby is less
than 0.5 Watts.