4
EN
BLUETOOTH PAIRING
1. Pair your Bluetooth device:
• Press and hold 3 seconds. You will hear an audible alert and
the blue LED ring at the base of the remote is flashing to
indicate pairing mode.
• Once in pairing mode, select JBL Cruise X on your Bluetooth
device.
• A solid blue LED ring at the base of the remote indicates that
your Bluetooth device has successfully paired with the JBL
Cruise X.
NOTE:
The JBL Cruise X features an attenuation selector
switch for the rear speakers on the amplifier control panel. Once
you have paired your Bluetooth device, play music and listen
at normal volume levels of front and rear speakers. If the rear
speakers sound too loud relative to the front speakers, apply
-3dB or -6dB of attenuation to the rear speakers using the
selector switch on the amplifier end panel.
REAR SPEAKERS
0
-3dB -6dB
PHONE CHARGING, EXTRA SOURCES, AND
ADDING EXTRA SPEAKERS
The JBL Cruise X features additional wire connections to make
installation as flexible as possible, and to allow you to add extra
sources and functionality:
1. A USB input with 5V/1A charging for connecting and charging
your Bluetooth device.
2. An RCA AUX Output allows you to use the JBL Cruise X as
the primary audio source while plugging in additional powered
speakers, or powered subwoofer, using RCA patch cables.
A remote output wire enables auto turn-on of the powered
accessory product/s.
3. An RCA AUX Input allows you to use the JBL Cruise X as a
powered speaker system while plugging in the audio signal
from an external source, such as a head unit or JBL sound
bar using RCA patch cables.
Note:
Bluetooth
®
audio playback will automatically take priority
over playback from a source connected to the AUX inputs. The
AUX input will play automatically if Bluetooth
®
is paused or no
audio signal is present. The USB input is for charging only, and
does not support audio playback.
SPECIFICATIONS
Speaker size
3 inches (75mm)
Interconnect speaker wire length
9.5 feet (2.9 meters)
Remote control wire length
8 feet (2.43 meters)
RMS Power Output (Watts x
Channel)
20W x 4
Battery Voltage Range (Volts)
8V to 17V
Turn-on Mode
12V
Amplifier LED Indicator (at
amplifier)
Red/Green
Bluetooth LED Indicator (at
remote)
Blue
Frequency Response, +/- 1dB
120Hz to 20kHz
Input Sensitivity - Low Level
400mV to 2V
Fuse Rating
10A
USB Charging
5V (1A)
Auxiliary Inputs
RCA
Pre-Amp Outputs
RCA
Protection
DC, OVP, UVP, OCP,
OTP
Bluetooth version:
4.2
Bluetooth profile:
A2DP V1.3,
AVRCP V1.6
Bluetooth transmitter frequency
range:
2402 – 2480 MHz
Bluetooth maximum transmitter
power:
10 dBm (EIRP)
Bluetooth transmitter modulation:
GFSK, π/4 DQPSK,
8DPSK
