Harman JBL CINEMA SB190, Руководство пользователя

Страница: 11 / 19

www.jbl.com
E
ngli
sh
11 11
6 PLAY
6.1 Power-on/Auto standby/Auto wakeup
AC~
C~ AIR C~ AIR
2 1
AC~
Switch on
1. Connect the soundbar and subwoofer to power by using the
supplied power cords.
2. Press to switch on.
→ The subwoofer is connected to the soundbar automatically.
Connected: The connection status indicator turns solid
amber( ).
NOTES:
−
Use the supplied power cord only.
− Before switching on the soundbar, make sure that you have
completed all other connections (See
“5.1 Connection with your TV
and digital devices” in the “5 CONNECT” chapter).
Auto standby
If the soundbar is inactive for more than 10 minutes, it will switch
to standby mode automatically. The subwoofer also goes to
standby, and the connection status indicator turns slow flashing
amber ( ).
Next time you switch on the soundbar, it returns to the last
selected source.
Auto wakeup
In standby mode, the soundbar will wake up automatically when
• the soundbar is connected to your TV through the HDMI
ARC connection and your TV is switched on;
•
the soundbar is connected to your TV through an optical
cable and audio signals are detected from the optical cable.
6.2 Play from the TV source
With the soundbar connected, you can enjoy TV audio from the
soundbar speakers.
1. Make sure that your TV is set to support external speakers
and the built-in TV speakers are disabled. Refer to the owner’s
manual of your TV for more information.
2. Make sure that the soundbar has been properly connected
to your TV (See “5.1 Connection with your TV and digital
devices” in the “5 CONNECT” chapter).
3. To select the TV source, press on the soundbar or
/ on the remote control.
→
The status indicator turns solid white ( ), if you play from
the source.
→ The status indicator turns solid amber ( ), if you play from
the
Optica
l source.
6.2.1 TV remote control setup
To use your TV remote control for both your TV and the soundbar,
check that your TV supports HDMI-CEC. If your TV does not support
HDMI-CEC, follow the steps under “TV remote control learning”
.
HDMI-CEC
If your TV supports HDMI-CEC, enable the functions as instructed
in your TV user manual. You can control the /-, sound
source, and power on/standby functions on your soundbar
through the TV remote control.
TV remote control learning
Through IR learning, your Infra-red TV remote control can learn
some commands of the soundbar.
1. Check that you have switched the soundbar to standby mode.
2. On the soundbar, press and hold and + until the status
indicator flashes amber.
→ You enter the TV remote control learning mode.
3. Within seconds, do the following on the soundbar and your
TV remote control:
a) On the soundbar: press and hold one of the following
buttons: + , - , and , until the status indicator flashes
red three times.
b) On your TV remote control: double press the desired button.
→ When the status indicator flashes amber on the soundbar,
the function of the soundbar button is learnt by your TV
remote control button.