background image

10

10

6.2 Play from the TV source 

With the soundbar connected, you can enjoy TV audio from the 

soundbar speakers. 

1. 

Make  sure  that  your  TV  is  set  to  support  external  speakers 

and the built-in TV speakers are disabled. Refer to the owner’s 

manual of your TV for more information.

2.  Make sure that the soundbar has been properly connected 

to your TV 

(See ”5.1 TV connection” in the ”5 CONNECT”chapter)

.

3.  To select the TV source, press 

 

on the soundbar or 

 

 

on the remote control. 

 

The status indicator turns solid white ( ), if your TV is 
connected to the soundbar through the 

 

connector.

 

The  status  indicator  turns  solid  amber  (

), if your TV 

is connected to the soundbar through the 

  

connector.

 

6.2.1 TV remote control setup

To use your TV remote control for both your TV and the soundbar, 
check  that  your  TV  supports  HDMI-CEC.  If  your  TV  does  not 
support  HDMI-CEC,  follow  the  steps  under  ”TV  remote  control 

learning”.

HDMI-CEC

If your TV supports HDMI-CEC, enable the functions as instructed 
in your TV user manual. You can control the /-, sound

source, and power on/standby functions on your soundbar 

through the TV remote control.

TV remote control learning

Through IR learning, your Infra-red TV remote control can learn 
some commands of the soundbar. 

1. 

Check that you have switched the soundbar to standby mode.

2.  On the soundbar, press and hold 

 

and 

+

 until the status 

indicator flashes amber.

 

You enter the TV remote control learning mode.

3.  Within seconds, do the following on the soundbar and your 

TV remote control:

a)  On the soundbar: press and hold one of the following 

buttons: 

+

-,

 

 

and 

, until the status indicator flashes 

red three times. 

b) 

On  your  TV  remote  control:  double  press  the  desired 

button.

 

When the status indicator flashes amber on the soundbar, 

the function of the soundbar button is learnt by your TV 

remote control button.

4. 

Repeat Step 3 to complete the button learning. 

5. 

To exit the TV remote control learning mode, press and hold  

 

and 

+

  on  the  soundbar  until  the  status  indicator  flashes 

amber three times.

6.3 Play from the Bluetooth source

Through Bluetooth, stream audio from your Bluetooth device to 

the soundbar. 

<

 10 m / 33 ft

1.  Check that the soundbar has been properly connected to 

your Bluetooth device (See ”5.2 Bluetooth connection” in the 

”5 CONNECT” chapter).

2.  To select the Bluetooth source, press   on the soundbar or  

on the remote control.

3.  Start audio play on your Bluetooth device. 

4. 

Adjust the volume on the soundbar or your Bluetooth device.

Содержание JBL CINEMA BAR 140
















Отзывы: