10
Notes:
–
If the soundbar is connected to your TV through both an HDMI
cable and an optical cable, the HDMI cable is selected for the TV
connection.
6.3.1 TV remote control setup
To use your TV remote control for both your TV and the soundbar,
check that your TV supports HDMI-CEC. If your TV does not
support HDMI-CEC, follow the steps under “TV remote control
learning”.
HDMI-CEC
If your TV supports HDMI-CEC, enable the functions as instructed
in your TV user manual. You can control the /-, mute/
unmute, and power on/standby functions on your soundbar
through the TV remote control.
TV remote control learning
1. On the soundbar, press and hold
and
+
until the status
indicator flashes white twice.
→
You enter the TV remote control learning mode.
2. Within 15 seconds, do the following on the soundbar and your
TV remote control:
a) On the soundbar: press one of the following buttons:
+
,
-
,
+
and
-
together (for the mute/unmute function), and
.
b)
On your TV remote control: press the desired button.
→
When the status indicator flashes white twice on the
soundbar, the function of the soundbar button is
learnt by your TV remote control button.
3.
Repeat Step 2 to complete the button learning.
4.
To exit the TV remote control learning mode, press and hold
and
+
on the soundbar until the status indicator flashes
white twice.
→
The soundbar returns to the last selected source.
6.4 Play from the Bluetooth source
Through Bluetooth, stream audio from your Bluetooth device to
the soundbar.
1. Check that the soundbar has been properly connected to
your Bluetooth device (See “Bluetooth connection” in the
“CONNECT” chapter).
2. To select the Bluetooth source, press on the soundbar or
on the remote control.
3. Start audio play on your Bluetooth device.
4.
Adjust the volume on the soundbar or your Bluetooth device.
7. SOUND SETTINGS
Bass adjustment
1. Check that the soundbar and the JBL BAR 2.0 SUB subwoofer
(sold separately) are properly connected (See “First-time setup
of JBL BAR 2.0 SUB (sold separately) in the “PLAY” chapter).
2.
On the remote control, press
repeatedly to switch between
bass levels.
Audio sync
With the audio sync function, you can synchronize audio and
video to make sure that no delay is heard from your video content.
1.
On the remote control, press and hold
TV
.
→
Ready for audio sync: The status indicator scrolls white.
2.
Within five seconds, press
+
or
-
on the remote control to
adjust the audio delay and match with video.
→
The status indicator scrolls to show the change range.
Smart mode
With the smart mode enabled by default, you can enjoy TV
programs with rich sound effects. For TV programs such as
news and weather forecasts, you can reduce sound effects by
disabling the smart mode and switching to the standard mode.
Smart mode: EQ settings and JBL Surround Sound are applied
for rich sound effects.
Standard mode: The preset EQ settings are applied for standard
sound effects.
To disable the smart mode, do the following:
•
On the remote control, press
.
→
When the smart mode is disabled, the status indicator
scrolls white twice.
→
Next time you switch on the soundbar, the smart mode is
enabled again automatically.
Содержание JBL BAR 2.0 PLUS
Страница 1: ...BAR 2 0 PLUS OWNER S MANUAL...
