Harman Infinity Kappa Perfect PowerSports, Руководство пользователя, Страница: 16 / 27

15
SETTING THE SOUND
Setting the input level
To match your amplifier’s input sensitivity (gain) to your source unit’s output level, we recommend
the following procedure:
• Turn the input level control counterclockwise to MIN (minimum).
• Play a dynamic music track through your source unit. Turn the source unit’s volume control to the
3/4 position.
• Turn the input level control dial clockwise towards MAX until you hear distortion in the music
(it’s no longer clear), then turn it counterclockwise until the music sounds clear again. Your input
sensitivity is now set.
MIN MAX
LEVEL
Crossover filters
You can adjust your Kappa Perfect amplifier’s filters to suit your listening preferences and speaker
configuration.
The
KP5004
lets you select either no filter (
OFF
) for a full-range signal, or a high-pass filter (
HPF
)
for your front channels if you’re powering a subwoofer with the rear channels. Slide the switch to
choose your desired crossover point.
For the rear channels, you can select between no filter (
OFF
); a high-pass filter (
HPF
) if you’re
powering a subwoofer independently, or a low-pass filter (
LPF
) if you’re using the rear channels
to power a subwoofer in bridged mode. Slide the
REAR – HZ
switch to choose your desired
crossover point.
OFF 120 80 60
FRONT – HPF
60 120 80
REAR – Hz REAR X-OVER
OFF LPF HPF