3
DJdi DIRECT BOX
Front Panel
1
2
1�
INPUTS - Connect your signal sources to these 1/4” unbalanced TS connectors
2�
VARIABLE INPUT ATTENUATOR CONTROL – Use this control (if necessary) to attenuate high signal level sources.
Rear Panel
1
2
1�
BALANCED OUTPUTS - Connect these balanced XLR connectors to an XLR input on your mixer
2�
GROUND LIFT SWITCH – By switching this out to the ON position, the internal connection to the output pin 1 is
removed, isolating the DJdi’s grounding system from the rest of the system. This eliminates many “hum” or “buzz”
problems due to ground loops.
