INPUTS
Connectors:
Female XLR and 1/4” TRS (Pin 2 and Tip hot)
Type:
Electronically balanced/unbalanced, RF filtered.
Impedance:
Balanced > 50 k
Ω
, unbalanced > 25 k
Ω
.
Maximum Input Level:
>+24dBu balanced and unbalanced.
CMRR:
>40dB; typically > 55dB at 1kHz
OUTPUTS
Connectors:
Male XLR and 1/4” TRS (Pin 2 and Tip hot)
Type:
Transformer balanced/unbalanced, RF filtered.
Impedance:
Balanced 30
Ω
, unbalanced 15
Ω
.
Maximum Output Level:
>+24dBu, >+22dBm(into 600
Ω
Load).
SIDECHAIN SEND (OUTPUT)
Connector: 1/4”
TRS
Type:
Impedance balanced, RF filtered.
Impedance:
Balanced 100
Ω
, unbalanced 50
Ω
.
Maximum Output Level:
>+22dBu.
SIDECHAIN RETURN (INPUT)
Connector:
1/4” TRS
Type:
Electronically balanced/unbalanced, RF filtered.
Impedance:
Balanced >40 k
Ω
, unbalanced >20k
Ω
.
Maximum Input Level:
>+22dBu balanced or unbalanced.
CMRR:
>40dB; typically > 55dB at 1kHz.
SYSTEM PERFORMANCE
0.1dB Bandwidth:
20 Hz to 20 kHz +0/-0.1dB, no gain reduction, unity gain.
Frequency Response:
<2 Hz to >200 kHz +0/-3.0dB, no gain reduction, unity gain.
Noise:
<-93dBu, unweighted, 20 Hz to 20 kHz measurement bandwidth.
Dynamic Range:
>117dB
THD + Noise:
0.008% typical at +4dBu, 1kHz, unity gain.
0.02% typical at +20dBu, 1kHz, unity gain.
<0.1% any amount of compression up to 30dB, 1kHz
IMD:
<0.02% SMPTE 4:1, no gain reduction, unity gain, 0dBu input.
Deviation From Linear Phase:
<1.0 degree, <10 Hz to 200 kHz, 30dB of compression.
Interchannel Crosstalk:
<-85dB, 20 Hz to 20 kHz.
Stereo Coupling:
True RMS Power Summing™.
COMPRESSOR
Threshold Range:
-40 to +20dBu
Ratio:
1:1 to
∞
:1
Threshold Characteristic:
Selectable OverEasy‚ or hard knee.
Attack/Release Modes:
Selectable Manual or Auto.
Manual Attack Time:
Scalable program-dependent. Typically 400dB/msec to 1dB/msec.
Manual Release Time:
Scalable program-dependent. Typically 4000dB/sec to 10dB/sec.
Auto Attack Time:
Program dependent, typically 15 ms for 10dB, 5 ms for 20dB, 3 ms
for 30dB.
Auto Release Time:
Program dependent, typically 120dB/sec.
Output Gain:
-20 to +20dB.
LIMITER
Threshold Range:
+4dBu to >+24dBu (off).
Ratio:
∞
:1
Limiter Type:
PeakStopPlus® two-stage limiter.
Stage 1:
Instantaneous Transient Clamp®.
Attack Time:
Zero
Release Time:
Zero
Stage 2:
Intelligent Predictive Limiting®.
Attack Time:
Program dependent, typically <5 msec.
Release Time:
Program dependent, typically 22dB/sec.
27
Содержание DBX 162SL
