Harman crown DriveCore Install DA Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 59

Harman crown DriveCore Install DA Series Скачать руководство пользователя страница 11

page 7

DriveCore Install DA Series Operation Manual

Configuring the Network using NetSetter

Configuring the Network using NetSetter

The top of the NetSetter window displays overall operational functions that are available. At the bottom of the NetSetter window is an informational section that lists the

number of discovered devices and the IP address of the DHCP server (if available). There is also information regarding the PC HiQnet Address, IP Address, and Subnet

Mask.

Figure 8:

NetSetter window

1� PC Adapter

Use this dropdown menu to select the Network Interface Card (NIC) that NetSetter will use to attempt to discover HiQnet devices. All available NIC’s are listed by IP

Address. Selecting a new NIC will force a rescan of the network to which the new NIC is connected.

2� Display

The options available in this dropdown menu will filter the device list as follows:

a� All Devices

This is the default setting. All discovered devices are displayed.

b� HiQnet ID conflicts

Only discovered devices with HiQnet address conflicts are displayed.

c� IP address conflicts

Only discovered devices with IP address conflicts are displayed.

d� All conflicts

Only discovered devices with either HiQnet address conflicts or IP address conflicts are displayed.

«
...
9
10
11
12
13
...
»

Содержание crown DriveCore Install DA Series




























































Отзывы:

Нет отзывов