Page 6
DCP-555 Installation Guide
Quick Start
Quick Start
1� Connect the DCP-555's Ethernet B port to the VoIP/data network�
2� Power on the DCP-555�
•
IfusingDHCP
— Wait for the DCP-555 to be assigned an IP address� IP address status can be
confirmed by turning the front-panel
ENCODER
to navigate to the "Ethernet B Status" page�
Ethernet B Status
Ethernet Port B
Gateway:10.34.6.1
Link:Connected
IP: 10.34.6.87
DHCP: ON
MAC:74:FE:48:26:F0:86
SUBNET: 255.255.254.0
Eth A
<
VoIP 1 <
•
IfusingstaticIP
— From the front panel, navigate to the "Ethernet B Status" screen then press the
ENCODER
and turn DHCP off� You can now configure the static IP address settings using the
ENCODER
�
3� Connect the control device to the same network as the DCP-555�
4� Open a browser on the control device and type the IP address (from step 2) in to the address field� The
web-server app should launch in the browser if both devices are connected to the same network�
5� To log in, enter
administrator
for the password� Once logged in, you can change the password by clicking
the
User
icon
in the upper right-hand corner of the window�
6� Load a template from the BSS website or click the
CreateNew
button to create a new configuration�
7� Edit the configuration to taste� See the control app help for information on configuring the DCP-555�
8� Once configuration is complete, click the
Save
icon
in the upper right-hand corner of the app window
to save the configuration�
9� To save the configuration to the computer for backup or for use as a template in future installations,
navigate to the "Dashboard" window then click the
Download
button�
