© 2015 Harman. All rights reserved. NetLinx, WebControl, AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are registered
trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their
respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
AMX (UK) LTD, AMX by HARMAN - Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom • +44 1904-343-100 • www.amx.com/eu/
93-2106-02 REV: G
Last Revised: 12/28/2015
Accessing the WebConsole
NetLinx Masters have a built-in WebConsole that allows you to make various
configuration settings via a web browser on any PC with access to the Master.
The WebConsole consists of a series of web pages that are collectively called the
“Master Configuration Manager”. Refer to the
NX Series NetLinx Integrated Controllers
WebConsole & Programming Guide
for details on the WebConsole.
From any PC with access to the LAN that the target Master resides on:
1.
Open a web browser and type the IP Address of the target Master in the Address
Bar.
2.
Press
Enter
to access WebConsole for the Master. The initial view is the
WebControl page.
FIG. 3
WEBCONSOLE (MAIN PAGE)
Default Settings
The following sections list the default settings for the controller.
Default User Names and Passwords
The following table lists the default user names and passwords for accessing the
NX-2200 through NetLinx Studio or the WebConsole.
Default IP Addresses
The following table lists the default IP addresses for the NX-2200.
Configuration
All items in this section require accessing the WebConsole.
Enabling Security
To enable security:
1.
Select the
Security
tab on the WebConsole. The System Security Details appear.
2.
Click the
Enabled
check box to enable security and activate the Access options.
3.
Select the Access options which you want to require a login and password.
4.
Configure users and groups as necessary.
Wired 802.1x Security
The X-Series controllers support wired 802.1x, an IEEE Standard for Port-based
Network Access Control. To enable wired 802.1x, you must load an 802.1x certificate
file to your controller using NetLinx Studio. Once you add the certificate file to your
workspace, NetLinx Studio transfers the file to the appropriate directory on the
controller.
1.
Click to select (highlight) a System (in the Workspace tab of the Workspace Bar).
2.
Right-click on the
Other
folder to access the Other File Folder context menu, and
select
Add Existing Other File
.
3.
In the Add Existing Other File dialog, locate and select the certificate file (.crt) that
you want to add to the selected System. Change the Files of Type option to All
Files (*.*) to look for other file types, if necessary.
4.
Click
Open
to access the File Properties dialog, where you can view/edit general
file information for the selected file.
5.
Click
OK
to add the file to the selected System. The file should now appear in the
Other folder under the selected System.
Setting the Clock Manager Mode
To set the clock manager mode:
1.
On the Manage System tab, select a Time Sync option.
• Network Time: When this option is selected, the Master will connect to the default
NIST Server to get date and time information. You can select a different NIST
Server (or specify the IP Address of a known NIST Server) on the NIST Servers
tab.
• Stand Alone: This option lets the Master use its own internal clock. When this
option is selected, the Date and Time fields are available on this tab.
2.
Click
Accept
to save these settings to the Master.
Hardware Information
This section lists important hardware information for the NX-2200.
Port Numbers
Mounting the NX-2200
The NX-2200 ships with removable rack ears for installation into an equipment rack.
Use the supplied #8-32 screws to secure the rack ears to the sides of the controller. You
can attach the rack ears toward the front or rear panel for either a front-facing or
rear-facing installation.
Use the four #10-32 screws supplied in the mounting kit to secure the controller to the
rack.
DEFAULT USER NAMES AND PASSWORDS
User Name
Password
NetLinx Studio
netlinx
password
WebConsole
administrator
password
DEFAULT IP ADDRESSES
IP Address
Subnet
Static IP
192.168.1.3
255.255.255.0
ICSLAN
198.18.0.1
255.255.0.0
Link-local
169.254.x.y, where x and y are the least significant two octets of the MAC
address.
NX-2200 PORT NUMBERS
RS-232
RS-422/485
IR/Serial
I/O
Relay
2-4
1
11-14
22
21
