Harman AMX NMX-WP-N1512, Руководство пользователя, Страница: 24 / 34

Chapter 3: Windowing Processor Configuration Options
24
N1512 Windowing Processor User Manual
Network Setup for U0-U3 Section
The Network Setup for U0-U3 section of the Unit Settings page is shown in Figure 15 . Assign unique static IP addresses for each
of the U ports. These must be in the same subnet as the rest of the system (i.e., host computer, Windowing Processor, Encoders,
etc.). Options are described in Table 7 .
NOTE: The U ports do not operate like traditional network ports and will not create a network loop by being connected to the same
switch. Therefore, U ports can be connected to the same network switch without causing network issues.
FIG. 15
Network Setup for U0-U3 Section
Change Password Section
The Change Password section of the Unit Settings page is shown in Figure 16 . To change the N1512 Windowing Processor
interface password (for admin-level access) enter the current password in the field labeled Old Password , and enter a new
password in the New Password and Confirm Password fields. Click Change PW to accept the new password.
FIG. 16
Change Password
NOTE: If using auto-login (through N-Able or N-Command) the admin password needs to match the password stored in N-Able/
N-Command.
Software Section
The Software section of the Unit Settings page is shown in Figure 17 . Options are described in Table 8 .
FIG. 17
Software Section
TABLE 7
Unit Settings Page: Network Setup for U0-U3 Section
Option Description
Static IP U0 View/edit the current static IP address of the N1512 Windowing Processor’s U0 port.
Static IP U1 View/edit the current static IP address of the N1512 Windowing Processor’s U1 port.
Static IP U2 View/edit the current static IP address of the N1512 Windowing Processor’s U2 port.
Static IP U3 View/edit the current static IP address of the N1512 Windowing Processor’s U3 port.
Save Save changes made to the Network Setup settings for all U ports.