Harman AMX NMX-WP-N1512 Скачать руководство пользователя страница 17

Chapter 3: Windowing Processor Configuration Options

17

 N1512 Windowing Processor User Manual

Arrangement Page

Click the 

Arrangement

 link at the top of any of the main web pages to access the page shown in 

Figure 9

. This page is the main 

control area. It is a combination of arrange, stretch, and skew options. 

This area is also used to manipulate other settings such as borders, backgrounds, presets, output mode, and input streams. Select 

from any number of default or user-defined presets. Slide windows around on command for attention-getting displays while 

seamlessly switching AV streams in and out as needed. Se

Table 2

 for option descriptions.

FIG. 9  

Arrangement Page

Factory preset 

buttons

Click to create 

custom presets 

Saved presets 

drop-down menu

Click to cancel any arrangement 

changes made since last time the 

Take

 button was clicked.

Background 

selections

Click to replace 

the background

TABLE 2  

Arrangement Page Options

Option

Description

Window frames (1-4)

The Window view shown in the left (main) portion of the page represents the overall screen setup you are 

creating. From here, you can position and stretch windows by dragging-and-dropping, resizing, etc. You can 

fine-tune adjustments by directly entering values in the fields on the right side of the screen.

Number tabs (1-4)

Select the window for which you would like to view/edit settings.

X, Y coordinates

View/edit the top-left pixel coordinates of the selected window.

W, H 

View/edit the width and height (in pixels) of the selected window.

Priority

Set a priority value for window display. When windows overlap each other, this number determines back/front 

placement. The window with the highest 

Priority

 number is in front. For example, if a window with a 

Priority

 of 2 

overlaps a window with a 

Priority

 of 4, the window with 

Priority

 4 will display in front.

Stream

View/edit the input source stream number for the selected window.

Active checkbox

Enable to make the selected window active. If this box is not checked, the window will not be displayed.

Border

View/edit the color and width (in pixels) of the border around the selected window.

Snap and Grid

Enable to have windows snap to the grid edges. If enabled, as you drag a window away from the edge, it 

automatically aligns to the nearest edge. This keeps windows perfectly aligned and away from center.

Output Mode

View/edit the current output mode for the Windowing Processor.

Audio Stream

View/edit the output audio stream number for the Windowing Processor.

Содержание AMX NMX-WP-N1512



































Отзывы: