© 2022 Harman. All rights reserved. SmartScale, NetLinx, Enova, AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are
registered trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of
their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153
Basic USB 2.0 Setup
The N2612S Encoder and N2600 Decoders are USB 2.0-capable. By default, USB
connections are enabled and configured to follow video switching. Follow these steps
for basic USB 2.0 setup.
1.
On the N2612S Encoder, connect the USB-Micro port to the computer to be
controlled.
2.
Connect the computer’s video output to the Encoder’s
HDMI IN
port.
3.
On the N2600 Series Decoder, connect the
HDMI OUT
to the display.
4.
Connect a USB 2.0 device to the Decoder’s USB Standard-A ports (they can be
plugged into either port).
5.
Using N-Able, click the
Unit Management
tab.
6.
Click the
Auto Discover
button to discover your new devices (if you have not
already done so).
7.
Once discovery is complete (and you see the new units listed in N-Able), click
the
Video Matrix
tab.
8.
On the matrix, click the common cell for the desired Encoder/Decoder
streaming combination. See the screen shot below for an example.
9.
Click the
Take
button to make the change to your matrix. The radio button turns
green to indicate the connection was successful.
FIG. 4
CREATING STREAMING COMBINATIONS
Video/USB Switching Options
Switching Option
Description
USB Follows Video
By default, units can be switched using N-Able without
modifying the configuration. When you switch video streams
(using the matrix as shown above) the USB functionality will
follow the video.
Independent USB
Switching
Use N-Able’s
USB Matrix
tab to switch USB control (without
affecting video).
Independent Video
Switching
To switch video streams
without
affecting USB control, first
select
N-Able > Settings
from N-Able’s main menu. When
the
N-Able Settings
dialog box is displayed, disable the
USB
follows Video switching for KVM units
. Now you can use the
Video Matrix
to switch video streams only.
Specifications
Product Specifications
Models
Available:
AMX-N26D001 – Stand Alone
Power
Requirements:
PoE:
Powered via a PoE+ switch or other equipment with a PoE+
source. Conforms to IEEE 802.3at Class 4 (802.3at Type 2).
External:
2.0 amp @ 12 volts DC; 100-240 Volt AC power supply,
P/N N9312 (Sold separately)
Dimensions:
200 mm x 127 mm x 26.6 mm (LxWxH)
Weight:
1.48 lbs. (Approx. 673g)
Certifications:
FCC, CE, and UL
Environmental: Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Installation
Stand-alone, Surface Mount, Wall Mount or Rack Mount, *
NOTE: *Mounting wings (part number N9101) required for surface and wall
mounting. Rack shelf (part number N9102) Shelf accommodates two side-by-side
N-Series stand-alone Encoders and Decoders. Mounting accessories sold separately
and are compatible with most N-Series devices.
1000375429 REV: A
Last Revised: 2023-04-18
1000375429
