manualshive.com logo in svg

Harman AMX NI-2100, Справочник по аппаратуре

Поделиться
Скачать
Harman AMX NI-2100 Скачать руководство пользователя страница 28

Connections and Wiring

28

NI-2100/3100/4100 - Hardware Reference Guide

LAN Port Descriptions (Cont.)

Port type

Description

Standard Port #

ICSP

Peer-to-peer protocol used for both Master-to-Master and Master-to-device communications.
For maximum flexibility, the Master can be configured to utilize a different port than 1319, or disable 

ICSP over LAN completely from either Telnet or the Program Port located on the rear of the Master 

itself.
This type of communication is used by the various AMX product for communication amongst 

themselves.

1319 (UDP/TCP)

integration!

Solutions

This feature on the Master uses, by default, port 10500 for the XML based communication protocol. 

This port is connected to by the client web browser’s JVM when integration! Solutions control pages are 

retrieved from the on-board Master’s web server.
For maximum flexibility, the on-board Master can be configured to utilize a different port than 10500 or 

to disable integration! Solutions completely.

10500 (TCP)

Содержание AMX NI-2100






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды