Harman AMX MXT/D-2000XL-PAN Скачать руководство пользователя страница 39

Страница: 39 / 115

Settings Pages

Modero G4 Touch Panels - Configuration & Programming Manual

Security Profile Features

Each of the settings on this page has different features for touch panel security:

A transition from one security mode to another will reset the Protected/Web Control/remote login password to the default value for

the current security mode (please refer to the default passwords above). A transition to Secure or DoD mode will disable G4 Web

Control. Although the security password features are immediate, a reboot must occur for all the new security mode features to take

full effect.

NOTE:

Changing the security setting will also change the G4 Web Control password. This must be reset from the G4 WebControl

page 34

before you can access the panel via VNC.

Install Firmware

The

Install Firmware

page (FIG. 51) allows the touch panel to be reloaded with its original factory-loaded firmware, installed with a

previous version of the current firmware, or to install new firmware from an external storage disk, such as a USB stick.

Resetting to Factory-Installed Firmware

In certain circumstances, it may be necessary to uninstall the current firmware on a touch panel and return the panel to its original

factory default firmware. To reset the touch panel to its original factory firmware via the

Settings

pages:

From the

Install Firmware

page, select the

Factory

field.

A System Message window appears, asking “Are you sure you want to install the following firmware?”, with the version

“Factory Firmware” listed below (FIG. 52).

Security Profile Features

Standard:

• Factory default, shipped in this configuration.
• Default Password is

1988

• Remote login uses Telnet.

Secure:

• Default Protected Setup Password is

Amx1234!

• Minimum password requirement is 8 characters with at least one numeric character.
• Remote login uses SSH.
• Remote login user name is

amx

• Login failure attempt pauses 4 seconds before another login attempt is allowed.
• After 3 consecutive unsuccessful SSH login attempts, login lockout is enabled for 15 minutes.
• Login and logout audit logging is enabled.

DoD:

• Default Protected Setup Password is

Amx1234!

• Minimum password requirement is 8 characters with at least one numeric character, one uppercase character, one lower

case character, and one special character, with no duplicate adjacent characters.

• Remote login uses SSH.
• Remote login user name is

amx

FIG. 51

Install Firmware page

Install Firmware Page

Factory:

Select this to revert the panel back to its original factory-loaded firmware.

Select this to re-install the last previously loaded firmware version.

New:

Select this to install new firmware from an external disk, such as from a USB stick.

Note: if the panel does not detect an external disk containing firmware, this will be greyed out.

Содержание AMX MXT/D-2000XL-PAN




















































































































Результаты поиска

Содержание AMX MXT/D-2000XL-PAN

Отзывы:

Похожие инструкции для AMX MXT/D-2000XL-PAN

Бренды по названию

Популярные бренды

Harman AMX MXT/D-2000XL-PAN, Руководство по программированию

Результаты поиска

Содержание AMX MXT/D-2000XL-PAN

Отзывы:

Похожие инструкции для AMX MXT/D-2000XL-PAN

Бренды по названию

Популярные бренды