Harman AMX CTP-1301, Руководство пользователя

Страница: 16 / 60

User Manual - CTP-1301 16
Wiring
Warning:
• Before wiring, disconnect the power from all devices.
• Connect and disconnect the cables with care.
1. Connect video source
Connect the VGA and HDMI sources (such as PC, Blu-ray player, Apple TV, 4K media player, etc) to the VGA IN and HDMI IN
ports of the CTP-1301 TX respectively.
2. Connect HDBT OUT
Connect HDBT OUT of the CTP-1301 TX to HDBT IN of the CTP-1301 RX with a Shielded Cat 6a/7 cable.
3. Connect HDMI IN
Connect an HDMI source (such as BYOD system) to the HDMI IN port of the CTP-1301 RX.
4. Connect HDMI OUT
Connect an HDMI display device (such as a projector) to the HDMI OUT of the CTP-1301 RX.
5. Connect AUDIO OUT
Connect an audio receiver to the AUDIO OUT of the CTP-1301 RX.
6. Connections for additional control options:
• LAN Control (through NetLinx/Telnet/Web UI): Connect CTP-1301 RX to the same network as the control PC or control
system (e.g. NX-3200) via its LAN port.
•
RS232 Control: Connect an RS232 client device (e.g. projector) to the RS232 port of the CTP-1301 RX, and connect the
projector screen to RELAY port (1-2); send commands through NetLinx Studio to control the projector and screen.
7. C7. Connect the power adapter provided to the CTP-1301 RX.
One-way PoH enables the power to be sent from CTP-1301 RX to TX along a single Cat X cable; no additional power adapter
is required for the TX.
8. Power on all attached devices
When all connections are made and power is ON, check if all LED indicators on the CTP-1301 TX and RX are normal to
ensure the installation is successful. For LED indication, please refer to the Panel Description section.