Harman Stove Company Accentra Скачать руководство пользователя страница 30

 Harman Gold Warranty

Harman Stove Company warrants its products to be free from defects in material or workmanship, in normal use and

service, for a period of 6 years from the date of sales invoice and for mechanical and electrical failures, in normal use and
service, for a period of 3 years from the date of sales invoice.

If defective in material or workmanship, during the warranty period, Harman Stove Company will, at its option, repair or

replace the product as described below.

The warranty above constitutes the entire warranty with respect to Harman Stove Company products.  HARMAN STOVE

COMPANY  MAKES  NO  OTHER  WARRANTY,  EXPRESSED  OR  IMPLIED,  INCLUDING  “ANY”  WARRANTY  OF
MERCHANTABILITY,  OR  WARRANTY  OF  FITNESS  FOR  A  PARTICULAR  PURPOSE.  No employee, agent, dealer, or
other person is authorized to give any warranty on behalf of Harman Stove Company.  This warranty does not apply if the
product has been altered in any way after leaving the factory.  Harman Stove Company and its agents assume no liability for
“resultant damages of any kind” arising from the use of its products.  In addition, the manufacturer and its warranty administra-
tor shall be held free and harmless from liability from damage to property related to the operation, proper or improper, of the
equipment.

THERE  ARE  NO  WARRANTIES  WHICH  EXTEND  BEYOND  THE  DESCRIPTION  ON  THE  FACE  HEREOF.
THESE  WARRANTIES  APPLY only if the device is installed and operated as recommended in the user’s manual.
THESE  WARRANTIES WILL  NOT  APPLY if abuse, accident, improper installation, negligence, or use beyond rated

capacity causes damage.

HOW  TO MAKE A CLAIM - Any claim under this warranty should be made to the dealer from whom this appliance was

purchased.  Then contact is made with manufacturer, giving the model and serial numbers, the date of purchase, your dealer’s
name and address, plus a simple explanation of the nature of the defect.  Extra costs such as mileage and overtime are not
covered.  Nuisance calls are not covered by these warranties.

THIS   WARRANTY   IS   LIMITED   TO   DEFECTIVE   PARTS - REPAIR   AND/OR   REPLACEMENT   AT

HARMAN   STOVE  COMPANY’S   OPTION   AND   EXCLUDES   ANY  INCIDENTAL   AND   CONSEQUENTIAL
DAMAGES   CONNECTED  THEREWITH.

WARRANTY EXCLUSIONS: Failure due, but not limited to, fire, lightning, acts of God, power failures and/or surges,

rust, corrosion and venting problems are not covered.  Damage and/or repairs including but not limited to; remote controls,
filters, fuses, knobs, glass, ceramic brick panels, ceramic fiber afterburners, door packing, tile, ceramic log sets, paint, batteries
or battery back-up and related duct work are not covered. Also excluded from this warranty are consumable or normal wear
items including but not limited to; flame guides, grates, coal bars, afterburner hoods, fire brick, gaskets. Additional or unusual
utility bills incurred due to any malfunction or defect in equipment and the labor cost of gaining access to or removal of a unit that
requires special tools or equipment are not covered.  Maintenance needed to keep the stove in “good operating condition” is not
covered.  This includes, but is not limited to, cleaning, adjustment of customer controls and customer education.  Labor,
materials, expenses and/or equipment needed to comply with law and/or regulations set forth by any governmental agencies are
not covered.

This Warranty provides specific legal rights and the consumer may have other rights that vary from state to state.
In the event of change in ownership, the remaining portion of this warranty may be transferred to the new owner by

sending the new owner information to the Harman Stove Company.

PLEASE  READ  THE  LITERATURE  BY  THE  MANUFACTURER  FOR  THE  VARIOUS  ACCESSORY  DEVICES.

THE MANUFACTURER  WARRANTS  THESE  ACCESSORY  DEVICES,  NOT  HARMAN  STOVE  COMPANY  OR  THEIR
WARRANTY  ADMINISTRATOR.   FURTHERMORE,  THESE  ACCESSORY  DEVICES  MUST  BE  INSTALLED  AND
USED ACCORDING  TO  THE  RECOMMENDATIONS  OF  THE  MANUFACTURER.

REMEDIES - The remedies set forth herein are exclusive and the liability of seller with respect to any contract or sale or

anything done in connection therewith, whether in Contract, in tort, under any warranty, or otherwise, shall not, except as herein
expressly provided, exceed the price of the equipment or part of which such liability is based.

CLARIFY - The above represents the complete warranty, which is given in connection with stoves, manufactured by

Harman Stove Company.  No other commitments, verbal or otherwise, shall apply except by a written addendum to this
warranty.

HARMAN GOLD WARRANTY
6 YEAR TRANSFERABLE LIMITED
WARRANTY (Residential)

1 YEAR LIMITED WARRANTY (Commercial)

Содержание Accentra































Отзывы: