8. User menu
41
US english
8. User menu
8.1. Requesting/quitting user menu
After requesting the user menu, the following basic
settings can be selected on two planes according to
your personal preference.
First plane:
•
Gal
- Speed dependent volume control (GAL)
•
Tel
- Telephone characteristics
•
Lcd
- Adjusting display
•
Led
- Adjusting flashing diode
•
M/S
- Adjusting reception optimization
•
Nav
- Adjusting navigation announcements
Second plane:
•
Aux
- aux input setting
•
Cmp
- compass display setting
•
BeV
- Adjusting signal tone volume
The user menu is requested by pressing the
key
for more than 2 seconds.
In order to access the second plane of the user menu,
press the
multifunction key.
Press the
key again to quit the user menu.
GAL (Gal) setting
The GAL is a car radio control circuit, which auto-
matically adjusts the car radio volume to the vehicle
speed. This compensates for the driving noise pro-
duced at higher speeds.
Request the user menu. Press multifunction key
. With the right control knob
, select either
0
or
+15
.
With the GAL settings, the beginning of volume ad-
justment can be specified according to vehicle speed.
The setting is stored automatically.
Explanation:
•
0
- No volume increase
•
+1
- Volume adjustment is initiated at low speed
•
+15
- Volume adjustment is initiated at higher
speed
Telephone mute characteristics (Tel)
If the vehicle has a telephone system with hands-free
unit, the call can be heard through the car audio sys-
tem. Thus, there is no need for the usually required
additional speaker. However, the signal cables (AF -
telephone input and ground - telephone input) must be
connected to the car radio (see page 46).
For selection, request user menu. Press multifunction
key
to select
audio signal
or
mute
.
•
mute
- Telephone mute setting
•
audio signal
- Route call through radio
Display setting (Lcd)
The display setting allows you to select from three
different display versions.
• Negative Display Setting (
negativ
)
• Positive Display Setting (
positiv
)
• Automatic Display Setting (
automatic
) – the
display setting will be positive or negative depend-
ing upon the vehicle illumination.
G a l : + 4
Gal
Tel Lcd Led M/S Nav ->
->
Gal
G a l : + 4
Gal
Tel Lcd Led M/S Nav ->
Tel
T E L : m u t e
Gal
Tel
Lcd Led M/S Nav ->