SB 10
8
Connections
CAUTION:
Before making speaker connections, be sure that your receiver or amplifier is
turned off. If possible, make sure that its AC cord is unplugged from the AC power outlet.
Soundbar Connections
The SB 10 soundbar contains left-, center- and right-channel speakers that connect to
your audio/video receiver or amplifier’s front left, center and front right speaker outputs.
+
–
+
–
+
–
FRONT
LEFT
+
–
+
–
SURROUND
RIGHT
LEFT
RIGHT
CENTER
L
C
R
– + – + – +
SB 10CNTR
Receiver or Amplifier
To connect each wire to the soundbar:
Press down on the terminal cap to open the connection hole on the soundbar’s
1.
speaker terminal.
Insert the wire’s bare end all the way into the hole. Insert the conductor with the
2.
colored band into the speaker’s red (+) terminal, and insert the other conductor
into the speaker’s black (–) terminal, as shown in the illustration.
Release the cap to secure the wire.
3.
– +
Push Down on Cap
1.
to Open Hole
Insert Wire Into
2.
Open Hole
Release Cap to
3.
Secure Wire
IMPORTANT:
Make sure the (+) and (–) bare wires do not touch each other or the other
terminal. Touching wires can cause a short circuit that can damage your receiver or
amplifier.
Subwoofer Connections
1a If your receiver/processor has a dedicated subwoofer output with low-pass
filtering (also called bass management), use the included LFE cable to connect
the subwoofer’s Line Level LFE In jack to the dedicated subwoofer output (or LFE
output) of your receiver or preamp/processor. Set the subwoofer's Input Mode
switch to the “LFE” position.
Configure your receiver or preamp/processor’s setup menu for Subwoofer ON,
and set the front left, front right, center and surround speakers to Small. If
your receiver or preamp/processor offers a choice of subwoofer low-pass filter
crossover frequencies, choose 150Hz or the one closest to 150Hz.
SUBWOOFER
LFE OUT
+
–
+
–
+
–
FRONT
LEFT
RIGHT
+
–
+
–
SURROUND
LEFT
RIGHT
CENTER
Receiver or Amplifier
Subwoofer
LFE Cable
(included)
Connections
Colored Band to
Red Terminal
Speaker Wires
(included)
White
Band
Green
Band
Red
Band
Green
Band
Red
Band
White
Band
Set Input Mode
Switch to “LFE”
0252CSK - HK SB10 120V+230V OM EN.indd 8
05/10/10 14:07:43
