2 x 150W 2.2-channel stereo integrated amplifier
Power
■
150W x 2 into 8 ohms, 20Hz – 20kHz, at <0.07% THD, with all channels
driven simultaneously
■
High-current (±200 amps), ultrawide-bandwidth (10Hz – 100kHz)
amplifier design
Connectivity
■
Six analog stereo audio inputs
■
Two analog recording outputs
■
Four digital inputs (two optical and two coaxial)
■
Dual subwoofer outputs to connect up to two active subwoofers
■
One coaxial digital output for recording
■
Two real balanced inputs, using XLR connectors
■
One HRS (high-resolution synchronization) link
■
2.2-channel processor input allows the use of external audio processors
■
Two high-quality phono inputs for connection of record players with an
MM or MC cartridge
■
2.2-channel preamp outputs allow the use of external power amplifiers
■
Remote control input and output
■
Heavy-duty binding posts allow for the use of speaker cables up to 10mm
2
■
Headphone output
Advanced Performance Technologies
■
High-current capability provides the instantaneous current necessary to
precisely drive and control nearly any loudspeaker system
■
Ultrawide-bandwidth amplifier design for improved transient accuracy and
phase linearity
■
Low negative feedback for further improved dynamic accuracy
■
Use of discrete electronic circuitry to provide the highest performance
level
■
Dual-path technology allows for pure analog or pure digital audio
processing within the same product
■
EzSet/EQ room optimization for quick and accurate system setup,
optimized for two channels and two subwoofers
■
Symmetric (balanced) XLR analog inputs offer lower noise levels and
higher signal-to-noise performance
■
RLS IV digital-to-analog conversion technology, with dual conversion using
two stereo AD1955 high-grade DACs
■
The HRS link allows Harman Kardon CD players to lock themselves to the
external clock of the amplifier for a jitter-free connection, similar to having
the CD playback inside the amplifier
■
Dual differential input stages with their own high-voltage supply, resulting
in high gain and low noise
■
Cascoded predriver stage considerably reduces high-frequency distortion,
allowing crystal-clear high frequencies, free from any harsh sound
■
Thermal tracking mechanism using ThermalTrak
™
output stage transistors
that include internal temperature sensors to bias the current of the output
stage in real time
■
Sophisticated electronic protection circuitry guards the amplifier from
short-circuiting or from damaged speakers and wires, without impairing
sound quality, by using current-limiting or output relays
■
DC servo ensures that the DC level of the amplifier output will stay within
a specified limit at any condition
■
Multiple protection circuits will switch the amplifier off in case overcurrent,
overvoltage, overtemperature or DC protection is detected
■
Dual toroidal transformers and up to 16.000μF of supply filtering per
channel will allow high channel separation and tight bass control, even
with a low-impedance load
Ease of Use
■
Dual-line dot-matrix display
■
Remote A/B speaker switching
■
IR remote extension jacks for control of the amplifier when placed in a
cabinet
■
Harman Kardon system remote for control of compatible Harman Kardon
CD players and tuners
HK 990
© 2010 Harman International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of Harman International Industries, Incorporated, registered in the United States
and/or other countries. EzSet/EQ is a trademark of Harman International Industries, Incorporated. ThermalTrak is a trademark of Semiconductor Components Industries, LLC.
Features, specifications and appearance are subject to change without notice. EAN Code HK 990/230: 0282925063388
Harman Consumer, Inc.
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.harmankardon.com
Features
