Harman Kardon HK 3700, Руководство по обслуживанию

Страница: 7 / 120

HK 3700/3770
Remote control Functions
8
the following remote control functions are available in the remote provided with the
HK 3700/3770 remote:
1. power On/Off
2. Mute
3. external device direct remote control (programmable)
4. Stereo (to shift from external devices back to stereo receivers)
5. Source selection
6. Harman Volume
7. Menu access
8. navigation pad
9. tone control
10. exit
11. numeric keys
12. Volume control
13. Speaker 1/2 selection
14. preset selection
15. Sleep
16. dimmer
17. preset scan
18. auto preset
19. RdS function
20. Memory
21. external device control
Power ON and OFF buttons : press these buttons to turn the stereo receiver On and
OFF.
Mute
: press this button to mute or unmute the system.
Source selector button
: press one of these buttons to select a source device, which is
a component where a playback signal originates, e.g., dVd, cd or the tuner. this will also
turn On the receiver and switch the remote to the codes that operate the source device.
Harman Volume (HK 3770 Only)
: this button cycles the Harman Volume function
between high, low and off. Harman volume is an advanced digital signal processing
technology to control playback volume. It evens out the volume level on everything
you watch, improving your listening experience. Once you choose the volume level,
Harman Volume does the rest. It helps you avoid volume increase from commercials,
volume differences when you change channels or switch sources. It helps you listen to
the perfect sound of the dialogs.
Menu : this button helps you navigate through the source’s setup menu.
tone control: press this button to access the bass and treble controls. use the OK button
to select an adjustment and use the up/down buttons to change the settings.
Exit
: use this key to go back from the source’s setup menu.
OK
: this button is used to select items from the menu system.
Left/Right/up/down buttons: these buttons are used to navigate the menu systems.
Numeric keys : use these buttons to enter radio station frequencies when using the
tuner (after pressing the direct button), or to select station presets.
9.
Clear : press this button to clear a radio station frequency you have entered.
Direct
: press this button before using the numeric keys to enter a radio station
frequency.
Volume Up/Down buttons : press these buttons to increase or decrease the volume
level.
Speaker 1/2 : press the Speaker 1 button to enable the HK 3700/3770 Speaker 1 outputs,
and press the Speaker 2 button to enable the Speaker 2 Outputs. you may enable or
disable both sets of speaker outputs simultaneously. this feature is a convenient way of
hearing audio in more than one room at a time, although the same source material will
be played through both sets of speakers.
CH/Tuner : use this control to tune a radio station. tap one end of the button briefly to
tune one frequency step at a time, or press and hold it to seek the next frequency with
an acceptably strong signal.
P-Scan
: press this button once to scan through the stations you have previously
programmed as presets. each station will play for five seconds before the tuner skips to
the next preset station. press the button second time to select the current station. If no
presets have been programmed, the 0 pReSet message will be displayed.
A-Preset : the auto preset feature enables you to automatically set presets for all
available FM radio stations in your area with a single button press. to start the process,
make sure that the FM tuner has been selected as the source. press and hold this button.
the autO pReSet message will appear as the HK 3700/3770 tuner scans through all FM
stations with acceptable signal quality and programs them into the presets. If there are
fewer than 30 stations, the tuner will cycle through again, filling up the higher preset
slots with the same stations. the scan will stop when all 30 presets have been filled, or
after two scans through the FM band.
MEM : after you have tuned a particular radio station, press this button, then the
numeric Keys, to save that station as a radio preset.
RDS : when listening to an FM radio station that broadcasts RdS information, this
button activates the various RdS functions.
Transport Control buttons
: these buttons are used to control many source
components. when the remote is operating the receiver by default, these buttons will
control a Harman Kardon blu-ray disc player or dVd player.
Harman Kardon HK 3770 Service Manual
Page 7 of 120