Harman Kardon HD 990, Руководство по обслуживанию

Страница: 10 / 61

7
HD 990
HD 990 Remote Control Functions
a
power off
b
power on
c
numeric controls
d
program Button
e
clear Button
f
repeat Button
g
repeat a
›
B Button
h
skip Buttons
i
search Buttons
j
play/pause Button
k
stop Button
l
+10/–10 Buttons
m
random Button
n
time Button
o
check Button
p
open/close Button
q
display Button
r
folder Buttons
s
source Button
t
Info Button
a
Power Off:
press this button to put the unit in the standby mode.
b
Power On:
press this button to turn on the cd player. note that in order for the
power on button to operate, ac power must be applied to the unit, and the status mode
Indicator
2
should glow orange (see page 9 for more information). the unit will also
turn on when the play
4 j
or open/close
3 p
button is pressed.
c
Numeric Controls:
press these buttons to select a specific track on a disc. the unit
will immediately search for the track and begin to play it. for tracks 1 through 9 on a disc,
you need only press the desired number. for tracks 10 and above, the second and third
digit of the number must be entered within two seconds of the first digit. (see page 9 for
more information.) these buttons are also used to enter track numbers into the memory
for pre-programmed play lists. (see page 11 for complete information on programming
the cd player.)
d
Program Button:
press this button to begin the process of programming the cd
player to play the tracks on a disc in a specific order. once the button is pressed, enter
each of the desired track numbers in quick succession using the numeric controls button
c
. When you have entered the tracks to be played, press the play button
j
to begin
the programmed sequence. (see page 11 for complete information on programming the
cd player.)
e
Clear Button: press this button to remove selected or all tracks from the
programmed sequence. (see page 11 for complete information on programming the cd
player.)
f
Repeat Button:
press this button once to repeat only the track that is currently being
played, and note that the repeat and one indicators will light in the Information display.
press the button a second time so that the repeat and all indicators are illuminated to
repeat all tracks on the disc. (see page 12 for more information on repeat play.)
g
Repeat A-B Button: press this button to repeat a segment of the disc. press the
button once to mark the start of the portion to be repeated. press it again at the end of
the desired sequence. the marked passage will play continuously until the Stop button
k
is pressed. (see page 12 for more information on repeat play.)
h
Skip Buttons: press one of these buttons to move to the next track
fl·
, or to
move back to the previous track
‡fi
(see page 10).
i
Search Buttons:
press one of these buttons to search forward
—
or
backward
‚
through a disc to locate a particular portion of the selection being
played. holding the buttons pressed for some seconds will increase the search speed
(see page 10).
j
Play/Pause Button:
press this button to start the playback of a cd. If the cd
drawer is open, pressing this button will automatically close the drawer. press this button
once during playback to momentarily stop a disc. When the button is pressed again, the
disc will resume play at the point it was stopped.
k
Stop Button: press this button to stop the disc currently being played or to escape
from the program mode (see page 11 for complete information).
l
+10/–10 Buttons: press the +10 button to move to the 10th track after the current
track playing. press the –10 button to move to the 10th track before the track currently
playing.
m
Random Button: press this button to have all of the tracks played in a random order.
(see page 9 for more information.)
n
Time Button: press this button to select the time display. In normal operation, the
display will show the running time of a track being played. press the button once to check
the time remaining for the track in play. press the button a third time to view the elapsed
time for the cd being played, and a last time for the total play time remaining for the disc
in play (see page 10).
o
Check Button: press this button to check the order of tracks programmed into the
cd player’s memory. (see page 11 for complete information on programming the cd
player.)
p
Open/Close Button:
press this button to open or close the disc drawer. the drawer
may also be closed by pressing the Play button
4 j
or by gently pressing the edge
of the drawer. however, we do not recommend pushing the drawer, as damage to the
transport mechanism may result.
q
Display Button: press this button once to dim the front panel display to half
brightness. press it again to turn the display lights off completely. another press will
return the display to normal brightness.
r
Folder Buttons:
press the button to move to the next folder with mp3
data, and the folder – button to move to the previous folder with mp3 data.
s
Source Button: press this button to switch between the cd player’s output and the
output of other sources connected to one of the digital inputs
5
(see page 10 for more
information).
t
Info Button:
pressing this button consecutive times shows the different cd text
information available on a cd, or Id3 and other information available on a disc with mp3
data. to return to normal track number/time indication, press the time button
n
. (see
page 10 for more information.)
Remote Control Functions
a
t
q b
n
r
k
i
g
e
s
p
l
h
m
o
j
f
d
c
HD 990
harman/kardon