background image

8

REMOTE CONTROL FUNCTIONS

Remote Control Functions

0

Power Off:

Press this button to put the

unit in the Standby mode.

1

Power On:

Press this button to turn on the

CD player. Note that in order for the Power On
button to operate, AC power must be applied to
the unit, and the 

Status Mode Indicator

2

should glow orange (See page 11 for more infor-
mation). The unit will also turn on when the Play

4

9

or Open/Close 

6

B

button is pressed.

2

Numeric Controls:

Press these buttons to

select a specific track on a disc. The unit will
immediately search for the track and begin to play
it. For tracks 1 through 9 on a disc, you need only
press the desired number. For tracks 10 and
above, the second and third digit of the number
must be entered within two seconds of the first
digit. (See page 10 for more information.) These
buttons are also used to enter track numbers into
the memory for pre-programmed play lists. (See 
page 13 for complete information on program-
ming the CD player.)

3

Program Button:

Press this button to

begin the process of programming the CD player
to play the tracks on a disc in a specific order.
Once the button is pressed, enter each of the
desired track numbers in quick succession using
the 

Numeric Controls

2

. When you have

entered the tracks to be played, press the 

Play

button 

9

to begin the programmed sequence.

(See page 13 for complete information 
on programming the CD player.)

4

Clear Button:

Press this button to remove

selected or all tracks from the programmed
sequence. (See page 13 for complete information
on programming the CD player.)

5

Repeat Button:

Press this button once to

repeat only the track that is currently being
played, and note that the 

REPEAT

and 

ONE

indi-

cators will light in the 

Information Display

.

Press the button a second time so that the

REPEAT

and 

ALL

indicators are illuminated to

repeat all tracks on the disc. (See page 14 for
more information on Repeat Play.)

6

Repeat A 

B Button:

Press this button to

repeat a segment of the disc. Press the button
once to mark the start of the portion to be repeat-
ed. Press it again at the end of the desired
sequence. The marked passage will play continu-
ously until the 

Stop

button 

A

is pressed. (See

page 14 for more information on Repeat Play.)

7

Skip Buttons:

Press one of these buttons

to move to the next track 

fl·

, or to move

back to the previous track 

‡fi 

(See page 12).

8

Search Buttons:

Press one of these but-

tons to search forward 

or backwards

through a disc to locate a particular por-

tion of the selection being played. Holding the
buttons pressed for some seconds will increase
the search speed (see page 12).

9

Play/Pause Button:

Press this button to

start the playback of a CD. If the CD drawer is
open, pressing this button will automatically
close the drawer. Press this button once during
playback to momentarily stop a disc. When the
button is pressed again, the disc will resume play
at the point it was stopped.

A

Stop:

Press this button to stop the disc cur-

rently being played or to escape from the pro-
gram mode (see page 13 for complete informa-
tion).

B

+10/-10 Buttons:

Press the +10 button to

move to the 10th track after the current track
playing. Press the -10 button to move to the
10th track before the track currently playing.

C

Random Button:

Press this button to

have all of the tracks played in a random order.
(See page 10 for more information.)

D

Time Button:

Press this button to select

the time display. In normal operation, the display
will show the running time of a track being
played. Press the button once to check the time
remaining for the track in play. Press the button
a third time to view the elapsed time for the CD
being played, and a last time for the total play
time remaining for the disc in play (See page 11).

E

Check Button:

Press this button to check

the order of tracks programmed into the 
CD player's memory. (See page 13 for complete
information on programming the CD player.)

F

Open/Close:

Press this button to open or

close the disc drawer. The drawer may also be
closed by pressing the 

Play

button 

4

9

, or

by gently pressing the edge of the drawer.
However, we do not recommend pushing the
drawer, as damage to the transport mechanism
may result.

G

Display Button:

Press this button once to

dim the front panel display to half brightness.
Press it again to turn the display lights off com-
pletely. Another press will return the display to
normal brightness.

H

Folder Buttons:

Press the button

to move to the next folder with MP3 data, and
the Folder - button to move to the previous fold-
er with MP3 data.

I

Source Button:

Press this button to

switch between the CD player's output and the
output of other sources connected to one of the
digital inputs 

§

(See page 12 for more informa-

tion).

J

Info Button:

Pressing this button consecu-

tive times shows the different CD Text informa-
tion available on a CD, or ID3 and other infor-
mation available on a disc with MP3 data. To
return to normal Track number / Time indication
press the 

Time

button

D

. (See page 11 for

more).

Содержание HD 970

















Отзывы: