Harman Kardon AVR 7200 Скачать руководство пользователя страница 13

Страница: 13 / 187

MAIN REMOTE CONTROL FUNCTIONS 13

MAIN REMOTE CONTROL FUNCTIONS

MAIN REMOTE CONTROL FUNCTIONS 13

MAIN REMOTE CONTROL FUNCTIONS

Preset Up/Down Button:

When the tuner is in

use, press this button to scroll through the stations
programmed into the AVR 7200’s memory.

Tuning Up/Down Button:

When the tuner is

in use, this button will tune up or down through the
selected frequency band. If the

Tuning Mode Button

has been pressed so that

AUTO

appears in

the

Lower Display Line

and the

AUTO Indicator

lights, pressing either button will cause the tuner to

seek the next station with acceptable signal strength for
quality reception. When

MANUAL

appears in the

Lower Display Line

and the

AUTO Indicator

goes out, pressing this button will tune stations in single-
step increments. (See page 32 for more information.)

Disc Skip Button:

This button has no direct

function for the AVR 7200 but may be used to
change the disc in a CD or DVD changer when the
remote is programmed for that type of device.

Program Button:

This button is used to begin

the process of programming the remote. Press and hold
this button for three seconds to place the remote in the
programming mode. Once the red LED under the

Set

Button

lights, release the button. You may then

select from the desired option. (See pages 38 – 47 for
more information on configuring the remote.)

Light Button:

Press this button to activate the

remote’s backlight for ease of use in darkened rooms.

Multiroom:

Press this button to activate the multi-

room system or to begin the process of changing the
input or volume level for the second zone. (See page
36 for more information on the multiroom system.)

Macro Buttons:

Press these buttons to store or

recall a “Macro”, which is a preprogrammed sequence
of commands stored in the remote. (See page 41 for
more information on macros.)

Sleep Button:

Press this button to place the unit

in the Sleep mode. After the time shown in the display,
the AVR 7200 will automatically go into the Standby
mode. Each press of the button changes the time until
turn-off in the following order:

Night Mode Button:

Press this button to acti-

vate the Night mode. This mode is available in specially
encoded Dolby Digital sources, and it preserves
dialogue (center channel) intelligibility at low volume
levels.

OSD Button:

Press this button to activate the

On-Screen Display (OSD) system used to set up or
adjust the AVR 7200’s parameters.

Mute Button:

Press this button to momentarily

silence the AVR 7200 or TV set being controlled,
depending on which device has been selected.

AM/FM Tuner Select:

Press this button to select

the AVR 7200’s tuner as the listening choice. Pressing
this button when the tuner is already in use will select
between the AM and FM bands.

Channel Up/Down Selector:

This button has no

function when the AVR is being controlled, but when
programmed for use with a VCR, TV, cable box, satel-
lite receiver or other similar product it will change the
channel up or down. See pages 38 – 47 for more
information on programming the remote.

Delay Select Button:

Press this button to begin

the process for setting the delay times used by the
AVR 7200 when processing surround sound. After
pressing this button, the delay times are entered by
pressing the

Set Button

and then the

⁄

Navigation Button

to change the setting.

Press the

Set Button

again to complete the

process. (See page 23 for more information on
setting delay times.)

Speaker Select Button:

Press this button to

begin the process of configuring the AVR 7200’s
bass management system. Then press the

⁄

Navigation Button

to select the channel you

wish to set up. Press the

Set Button

and then

select another channel to configure. When all adjust-
ments have been completed, press the

Set Button

twice to exit the settings and return to normal

operation. (See page 21 for more information on
speaker setup.)

Memory Button:

Press this button to enter a

radio station into the AVR 7200’s preset memory.
Once

PRESET MEMORY

flashes in the

Lower Display Line

and the

Memory Indicator

lights, you have five seconds to enter a preset

memory location using the

Numeric Keys

(See page 32 for more information.)

Stereo Mode Select Button:

Press this button

to select a stereo listening mode. The first press of the
button places the AVR 7200 in a true, two-channel,
left/right Stereo mode with no surround processing.
The next press selects either five-channel Stereo or
seven-channel Stereo, depending on the speaker
configuration.

DTS Neo:6 Mode Select Button:

Press this

button to select a DTS Neo:6 mode. (See page 29
for the available DTS Neo:6 options.)

DTS Digital Mode Select Button:

When a

DTS-encoded digital source is playing, each press of
this button will scroll through the available DTS modes.
The specific choice of modes will vary according to
the type of encoding on the disc and your system’s

speaker configuration. When a DTS source is not in
use, this button has no function. (See page 29 for the
available DTS digital options.)

Dolby Mode Select Button:

This button is used

to select from the available Dolby Surround modes.
Each press of this button will select one of the Dolby
Pro Logic II modes or Dolby 3 Stereo. When a Dolby
Digital-encoded source is in use, the Dolby Digital
mode may also be selected. (See page 29 for the
available Dolby surround mode options.)

6-Channel/8-Channel Input Select:

Press this

button to select the device connected to the

Channel Direct Inputs

. (See page 28 for more

information.)

SPL Select Button:

This button activates the

EzSet function to quickly and accurately calibrate the
AVR 7200’s output levels. When the button is pressed
you will then need to select between automatic EzSet
operation or using the remote as a manual SPL meter
by pressing the

⁄

Navigation Button

until

your choice appears in the remote’s LCD display.
Press the

Set Button

to enter the setting, and

then follow the instructions as displayed in the LCD
display. (For complete information, see page 24.)

EzSet Microphone Sensor:

The microphone

sensor that is used by the EzSet system is behind the
three slots at the top of the remote control. When
using EzSet to calibrate the AVR 7200 be certain that
the slots are not covered. (See page 24 for more
information on using EzSet.)

Lens:

The infrared emitters behind the plastic

lens at the top of the remote communicate the remote
codes to the AVR 7200. Be certain that the lens is not
covered when using the remote, and point the lens
toward the AVR for best results. In learning mode, the
remote receives IR codes to be learned through a
sensor behind the lens.

NOTE:

DO NOT remove the rubber plug that is supplied

to cover the jack on the upper right side of the remote.
The jack is not active and is reserved for future use.

min