Harman Kardon AVR 435 Скачать руководство пользователя страница 8

Страница: 8 / 142

FRONT-PANEL CONTROLS

6 FRONT-PANEL CONTROLS

Tuning Selector:

Press the left side of the button

to tune lower-frequency stations and the right side of
the button to tune higher-frequency stations. When
the tuner is in the

MANUAL/MONO

mode,

each tap of the Selector will increase or decrease the
frequency by one increment. When the tuner receives
a strong-enough signal for adequate reception,

MANUAL TUNED

will appear in the

Lower

Display Line

and in the on-screen display. When

the tuner is in the

AUTO/STEREO

mode,

press the button once, and the tuner will scan for a
station with acceptable signal strength. When the
next higher- or lower-frequency station with a strong-
enough signal is tuned, the frequency scan will stop
and the

Lower Display Line

and the on-screen

display will indicate

AUTO TUNED

. When an

FM Stereo station is tuned, the display will read

AUTO ST TUNED

See page 37 for more

information on using the tuner.

Tuner Band Selector:

Pressing this button will

automatically switch the AVR

435

to the Tuner mode.

Pressing it again will switch between the AM and FM
frequency bands.

(See page 37 for more information

on the tuner.)

Preset Station Selector:

Press this button to

scroll up or down through the list of stations that have
been entered into the preset memory.

(See page 37

for more information on tuner programming.)

Input Source Selector:

Press this button to

change the input by scrolling up or down through the
list of input sources.

Tuning Mode Selector:

Press this button to select

Auto or Manual tuning. When the button is pressed so
that

AUTO/STEREO

appears in the

Upper

Display Line

, the tuner will search for the next

station with an acceptable signal when the

Tuning

Selector

4wé

is pressed. When the button is

pressed so that

MANUAL/MONO

appears in the

Upper Display Line

, each press of the

Tuning

Selector

4wé

will increase the frequency.

(See

page 37 for more information on using the tuner.)

This

button may also be used to switch between Stereo and
Mono modes for FM radio reception. When weak

reception is encountered, select the Manual/Mono
tuning mode. Press and hold again to switch back to
Stereo mode.

(See page 37 for more information on

using the tuner.)

Front-Panel Control Door:

To open the door so

that the front-panel jacks and controls behind this door
may be accessed, gently pull the door down and
towards you using either upper corner of the door.

)

Volume Control:

Turn this knob clockwise to

increase the volume, counterclockwise to decrease the
volume. If the AVR

435

is muted, adjusting the volume

control will automatically release the unit from the
silenced condition.

Input Indicators:

One of these indicators will light

to identify the currently selected input. Note that the
entire list will light briefly each time the unit is turned
on as a test.

Speaker/Channel Input Indicators:

These indi-

cators are multipurpose, indicating both the speaker
type selected for each channel and the incoming data-
signal configuration. The left, center, right, right surround
and left surround speaker indicators are composed of
three boxes, while the subwoofer is a single box. The
center box lights when a “small” speaker is selected,
and the two outer boxes light when “large” speakers are
selected. When none of the boxes are lit for the center,
surround or subwoofer channels, no speaker has been
assigned that position.

(See page 26 for more informa-

tion on configuring speakers.)

The letters inside each

box displays the active input channels. For standard
analog inputs, only the L and R will light, indicating a
stereo input. For a digital source, the indicators will light
to display the channels being received at the digital
input. When the letters flash, the digital input has been
interrupted.

(See page 36 for more information on the

Channel Indicators.)

Upper Display Line:

Depending on the unit’s

status, a variety of messages will appear here. In
normal operation, this line will show the current input
source and identify whether an analog or digital input
is in use. When the tuner is selected as the input, this
line will identify the station as AM or FM and show the
frequency and preset number, if any.

Lower Display Line:

Depending on the unit’s

status, a variety of messages will appear here. In nor-
mal operation, the current surround mode will appear
on this line.

Surround Mode Indicators:

One of these

indicators will light to show the surround mode in
use. Depending on the specific combination of input
sources and surround mode selected, more than
one indicator may light.

(See page 34 for more

information.)

Remote Sensor Window:

The sensor behind

this window receives infrared signals from the remote
control. Aim the remote at this area and do not block
or cover it unless an external remote sensor is
installed.

AVR 435 OM 12/27/04 2:57 PM Page 6