Harman Kardon AVR 430 Скачать руководство пользователя страница 14

Страница: 14 / 126

MAIN REMOTE CONTROL FUNCTIONS 13

MAIN REMOTE CONTROL FUNCTIONS

MAIN REMOTE CONTROL FUNCTIONS 13

MAIN REMOTE CONTROL FUNCTIONS

Transport Fast-Play/Scan Buttons:

These but-

tons have no direct function on the AVR

630

, but they

are used when the remote is programmed for a com-
patible DVD, CD or tape player. Pressing these buttons
will transmit a fast-play forward, fast-play reverse,
or fast-forward or -reverse scan command, according
to the capabilities of the player being controlled. In the
factory default setting, these buttons are preprogrammed
with the remote codes for Harman Kardon DVD players
so that you may control a compatible player without
having to switch devices.

Main Transport Controls:

These buttons have

no direct function on the AVR

630

, but they are used

when the remote is programmed for a compatible
DVD, CD or tape player. Pressing these buttons
will transmit a stop (

), record (

), or pause (

)

command, according to the capabilities of the player
being controlled. In the factory default setting, these
buttons are programmed with the remote codes for
Harman Kardon DVD players so that you may control
a compatible player without having to switch devices.

Track Skip Up/Down Buttons:

These buttons

do not have a direct function with the AVR

630

, but

when used with a compatibly programmed CD or DVD
changer will change the track or chapter currently being
played. In the factory default setting, these buttons are
programmed with the remote codes for Harman Kardon
DVD players so that you may control a compatible player
without having to switch devices.

Preset Up/Down Button:

When the tuner is in

use, press this button to scroll through the stations
programmed into the AVR

630

’s memory.

Tuning Up/Down Button:

Press this button

when the tuner is in use to change the station to one
with a higher or lower frequency. When the tuner is in
the

MANUAL/MONO

mode, each tap of the

Selector will increase or decrease the frequency by
one increment. When the tuner receives a strong-
enough signal for adequate reception,

MANUAL

TUNED

will appear in the

Lower Display Line

and in the on-screen display. When the tuner is in

the

AUTO/STEREO

mode, press the button

once, and the tuner will scan for a station with accept-
able signal strength. When the next higher- or lower-
frequency station with a strong enough signal is tuned,
the frequency scan will stop and the

Lower Display

Line

and the on-screen display will indicate

AUTO TUNED

. When an FM Stereo station is

tuned, the display will read

AUTO ST TUNED

See page 34 for more information on using the tuner.

Disc Skip Button:

This button has no direct

function for the AVR

630

but may be used to change

the disc in a CD or DVD changer when the remote is
programmed for that type of device.

Program Button:

This button is used to begin

the process of programming the remote. Press and hold
this button for three seconds to place the remote in the
programming mode. Once the red LED under the

Set

Button

lights, release the button. You may then

select from the desired option.

(See pages 40 – 49 for

more information on configuring the remote.)

Light Button:

Press this button to activate the

remote’s backlight for ease of use in darkened rooms.

Multiroom Button:

Press this button to begin the

process of activating the multiroom system or to
change the input or volume level for the second zone.

(See page 38 for more information on the multiroom
system.)

Macro Buttons:

Press these buttons to store or

recall a “Macro”, which is a preprogrammed sequence
of commands stored in the remote.

(See page 43 for

more information on macros.)

Sleep Button:

Press this button to place the unit

in the Sleep mode. After the time shown in the display,
the AVR

630

will automatically go into the Standby

mode. Each press of the button changes the time until
turn-off in the following order:

When the Sleep timer is in use the front panel displays
indicators will dim to half brightness.

Night Mode Button:

Press this button to acti-

vate the Night mode. This mode is available in specially
encoded Dolby Digital sources, and it preserves
dialogue (center channel) intelligibility at low volume
levels.

OSD Button:

Press this button to activate or turn

off the On-Screen Display (OSD) system used to set up
or adjust the AVR

630

’s parameters.

Tone Control Button:

This button controls the

tone mode settings, enabling adjustment of the bass
and treble boost/cut. You may also use it to take the
tone controls out of the signal path completely for
“flat” response. The first press of the button displays a

TONE IN

message in the

Lower Display Line

and in the on-screen display. To take the controls

out of the signal path press either of the

⁄

Navigation Buttons

until the display reads

TONE OUT

. To change the bass or treble settings,

press the button again until the desired option appears
in the

Lower Display Line

and in the on-screen

display and then press either of the

⁄

Navigation Buttons

to enter the desired boost

or cut setting.

See page 29 for more information on

the tone controls.

Mute Button:

Press this button to momentarily

silence the AVR

630

or TV set being controlled,

depending on which device has been selected.

AM/FM Button:

Press this button to select the

AVR

630

’s tuner as the listening choice. Pressing this

button when the tuner is already in use will select
between the AM and FM bands.

Channel Up/Down Selector:

This button has no

function when the AVR is being controlled, but when
programmed for use with a VCR, TV, cable box, satel-
lite receiver or other similar product it will change the
channel up or down.

See pages 40 – 49 for more

information on programming the remote.

Transport Play Buttons:

These buttons have no

direct function on the AVR

630

, but they are used

when the remote is programmed for a compatible
DVD, CD or tape player. Pressing these buttons will
transmit a forward- or reverse-play command,
according to the capabilities of the player being
controlled. In the factory default setting, these buttons
are programmed for Harman Kardon DVD players so
that you may control a compatible player without
having to switch devices.

Delay Select Button:

This button selects

adjustments to the A/V Sync Delay and the individual
channel displays. The first press of the button displays
an

A/V SYNC DELAY

message in the

Lower

Display Line

and in the on-screen display, which

means that you may change the amount of time that
all channels are delayed together behind the video.
This enables you to compensate for the loss of lip
sync that may be caused by digital video processing
in your display or by television stations. To change
the A/V Sync Delay, press the

Set Button

while

the

A/V SYNC DELAY

message is visible

and then use the

⁄

Navigation Button

change the setting so that the sound and the
video image are in sync. To change the delay for
an individual output channel, press the

⁄

Navigation Button

until the desired channel