AVR
23
EN
GL
ISH
Making Connections, Set Up the Remote Control
to control more than one source device through the Avr’s Ir remote out connector,
connect all sources in “daisy chain” fashion, connecting each device’s Ir output to the
next device’s Ir input, starting with the Avr.
If you install a multizone system, connect an Ir control device to the Zone 2 Ir In
•
connector for remote-room control of the multizone system, source devices and
volume in the remote zone.
external Ir
receiver
Zone 2
Main Room
Zone 2 Speakers
Avr
If a source device is shared with the main listening area, any control commands issued
to that source will also affect the main room.
Connect the 12V Trigger Output
If your system has equipment that can be controlled by a dc trigger signal, connect it to
the Avr’s 12v trigger connector with a mono 1/8-inch (3.5mm) mini-plug interconnect
cable. the Avr will supply a 12v dc (100mA) trigger signal at this connection whenever
it is powered on.
Avr
device with
trigger In connector
mono 1/8-inch
(3.5mm) mini-plug
Interconnect
(not supplied)
Connect to AC Power
connect the supplied Ac power cord to the Avr’s Ac Input connector and then to a
working Ac power outlet.
Avr
Ac Input
connector
Ac power
outlet
power cord
(supplied)
Set Up the Remote Control
Install the Batteries in the Remote Control
remove the remote control’s battery cover, insert the four supplied AAA batteries as
shown in the illustration, and replace the battery cover.
NOTE:
remove the protective plastic from the Avr’s front panel so it doesn’t reduce the
remote control’s effectiveness.
Program the Remote to Control Your Source Devices and TV
you can program your Avr remote to control many brands and models of audio/video
source devices and tvs. the remote is also ready to operate your ipod or iphone when
the ipod/iphone is docked in a connected the bridge IIIp (not included).
each of the remote’s Source Selector buttons has been preprogrammed to control certain
types of source devices:
Cable/Sat:
controls cable tv and satellite tv tuner boxes
Blu-ray:
controls blu-ray disc and dvd players
Bridge:
controls an ipod/iphone device docked in a connected the bridge IIIp
Radio:
controls the Avr’s built-in fm/Am tuner and a connected SIrIuSconnect tuner
TV:
controls tvs and video displays
USB (AVR 3650/AVR 365):
browses compatible media on a uSb device that is
inserted in the Avr’s uSb port (Avr 3650/Avr 365 only)
DVR (AVR 2650/AVR 265):
controls tivo
®
recorders
Game:
controls video-game consoles
Media Server:
controls media servers
Network:
browses compatible media on dlnA-compatible devices connected to your
home network.
AUX:
controls hdtv tuner boxes, cd players, vcrs and pvds.
Although the Source Selector buttons are preprogrammed for the device types listed
above, you can reassign a Source Selector button to a different device type. See
reassigning a Source Selector button for a different device type, on page 24.
0295CSK - HK (x65Series) AVR3650_365_2650_265 CORE OM, WORK18 danny.indd 23
01/07/11 11:33:54