manualshive.com logo in svg

Harman Kardon AVR 350, Руководство пользователя

Поделиться
Скачать
Harman Kardon AVR 350 Скачать руководство пользователя страница 6

6

INTRODUCTION

Thank you for choosing Harman Kardon

®

!

In the years since Harman Kardon invented the high-fidelity receiver,
we have taken to heart the philosophy of bringing the joy of home
entertainment to as many people as possible, adding performance and
ease-of-use features that enhance the home entertainment experience.
In the years since our first single-channel component was introduced,
Harman Kardon has offered a number of receiver models, each an
improvement upon its predecessors, leading to the AVR 350, a 
7.1-channel digital audio/video receiver that offers a wealth of listening
and viewing options, all in an elegant package.

To obtain the maximum enjoyment from your new receiver, we urge 
you to read this manual and refer back to it as you become more 
familiar with its features and their operation.

If you have any questions about this product, its installation or its 
operation, please contact your retailer or customer installer, or visit our
Web site at www.harmankardon.com.

AVR 350 7.1-Channel Audio/Video Receiver

Audio Section

• 55 Watts x 7, seven channels driven at full power at 8 ohms,

20Hz – 20kHz, <0.07% THD (surround modes), 385 watts total

• 70 Watts x 2, two channels driven at full power at 8 ohms,

20Hz – 20kHz, <0.07% THD (surround off mode), 140 watts total

• High-current capability, ultrawide-bandwidth amplifier design with low

negative feedback

• All-discrete amplifier circuitry

• Dual independent power supplies, for front and surround channels

• Quadruple-crossover bass management

• 24-Bit, twin-core Cirrus Logic

®

CS 49510 DSP processor with 

32-bit postprocessor

• 192kHz/24-bit D/A conversion

• Sampling upconversion to 96kHz

Surround Modes

• Dolby

®

Digital EX 

• Dolby Pro Logic

®

II and IIx (Movie, Music and Game)

• Dolby Virtual Speaker Version 2 (Reference two- or three-speaker;

Wide two-, three-, four- or five-speaker)

• Dolby Headphone Version 2 

• DTS

®

(5.1; DTS Stereo; DTS-ES

®

6.1 Discrete and Matrix)

• DTS 96/24

™

(DTS Stereo)

• DTS Neo:6

®

(Cinema 3-, 5- or 6-channel; Music 5- or 6-channel)

• Logic 7

®

(Cinema, Music and Enhance – 5.1 and 7.1)

• Hall 1 and Hall 2 (5- or 6-channel)

• Theater (5- or 6-channel)

• 5- or 7-Channel Stereo

• Surround Off (DSP or Analog Bypass)

Please register your AVR 350 on our Web site at www.harmankardon.com.

Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products
and/or special promotions.

WWW.HARMANKARDON.COM

AVR350 om.qxd  8/29/07  9:58 AM  Page 6

Содержание AVR 350













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды