Harman Kardon AVR 347 Скачать руководство пользователя страница 35

Страница: 35 / 218

OPERATION

of any of these three Input Selectors will select the source whose name
appears on the button (i.e., DVD, Tape or HDMI 1), as indicated by the
button lighting up in red. Press that Input Selector again quickly to select
the source whose name appears above the button (i.e., CD, The Bridge
or HDMI 2), and the selector will light in green to indicate that you have
selected the source whose name is printed above the button.

The AVR 347 will switch to the audio and video inputs assigned to the
source. If you selected a surround mode for the source, the AVR 347
will switch to that mode.

The source name will appear in the upper line of the front-panel display.
If you retitled the source, only the new title will appear. Otherwise, the
audio input assigned to the source (analog or one of the digital audio
inputs) will also appear. The surround mode will be displayed on the
lower line. The same information will also appear on screen in the
semi-OSD, unless you have set the semi-OSD to OFF in the System
Setup menu, as described in the Advanced Functions section.

Audio Input Selection

The AVR 347 is programmed at the factory to use the analog audio
inputs for each source (except for the DVD, Video 2, HDMI 1 and
HDMI 2 sources; see Table 4). To assign a digital audio input to a
source (if you have not done so using the Input Setup menu during
Initial Setup), press the Digital Button on the remote or front panel. The
current audio input selection will flash in the display, and you may press
the

⁄

(or

‹

›

on the front panel) Buttons to scroll through the

audio inputs. When the desired input appears, press the Set Button to
select it. See Figure 72.

Figure 72 – Digital Input Selection

If the Auto Poll feature is ON in the Input Setup menu, and if a digital
audio input has been assigned to the source, the AVR 347 will first
check the digital audio input for a signal. If a signal is present, the
AVR 347 will select the digital audio input. If no signal is present,
the AVR 347 will switch to the analog audio inputs for the source.

Video Input Selection

When a source is selected, the AVR 347 switches to a video input
as follows:

The VIDEO IN line of the Input Setup menu indicates which of the video
inputs on the AVR 347 is assigned to each source. As shown in Table 5,
by default the Component Video 1 input is assigned to the DVD source,
the Component Video 2 input is assigned to the Video 1 source, and the
Component Video 3 input is assigned to the Video 2 source. The two
HDMI inputs obtain the video signal from their own inputs, and may not
be reassigned to another video input.

If your iPod is capable of playing still images and videos, it may be used
as a video source. However, you may reassign the video input for The
Bridge to another device for viewing while listening to audio files stored
on the iPod.

All other sources default to the COMPOSITE setting, meaning that they
may only be used with their composite or S-video inputs. The AVR 347
will transcode the incoming composite or S-video signal and make it
available using the HDMI or component video monitor outputs, enabling
a single-cable connection to your television.

NOTES:

• Due to copy-protection restrictions, there is no output at the

Component Video Monitor Outputs for copy-protected sources.

• High-resolution 1080i and 1080p video signals are not avail-

able at the HDMI Output, and are downconverted to 720p for
the Component Video Monitor Outputs. If your source outputs
analog high-resolution video, either use the Component Video
Outputs, change the output resolution of your source device
to 720p, or connect your source’s component video outputs
directly to your video display.

• Due to the design of some video displays, analog 480p or

720p component video source signals may produce artifacts
when used with the AVR’s analog video outputs (composite,
S-video or component video). If this occurs, try changing the
Video Mode setting in the INPUT SETUP menu, or connecting
the source device’s video output directly to your video display.
However, for best results, we recommend you consider upgrad-
ing to an HDMI-capable video display.

• The AVR 347 cannot convert 1080i or 1080p analog video

signals to the HDMI format and downconverts them to 720p for
the Component Video Outputs. This affects users of Microsoft
Xbox 360 systems and some older set-top boxes. If your digital
cable television set-top box outputs 1080i or higher video via
component video outputs and is not equipped with an HDMI
output, contact your cable operator for a replacement. For Xbox
360 or satellite receivers with no HDMI output, change the
settings on your source device so that it outputs only 720p
video through its component video outputs, which the AVR can
convert to the HDMI format. Although you could connect the
source device’s component video outputs directly to your video
display, you would then have to select the correct video input
on the display to match the AVR’s input.

The component video inputs may be reassigned to other source inputs
as needed, depending on the physical connections you made during the
Installation procedure.

If a signal is present at the component video input assigned to that
source, it will be selected.

If no signal is present at the component video input, then the S-video or
composite video input for the source will be selected. It is not possible
to reassign the S-video or composite video inputs to other sources.

For audio-only sources, such as the tuner or CD inputs, when no compo-
nent video signal is present, the last-used video source will be selected.

AVR347