Harman Kardon AVR 325 Скачать руководство пользователя страница 15

Страница: 15 / 176

INSTALLATION AND CONNECTIONS

device should be made to either the

Video 2 Audio

Inputs

or any of the

Optical

Coaxial Digital

Input Jacks

8. If the component video inputs are used, connect
the

Component Video Monitor Outputs

to the

component video inputs of your TV, projector or dis-
play device.

9. If you have a camcorder, video game or other
audio/video device that is connected to the AVR on a
temporary rather than permanent basis, connect the
audio, video and digital audio outputs of that device to
the

Front-Panel Inputs

&*(Ó

. A device con-

nected here is selected as the Video 4 input, and the
digital inputs must be assigned to the Video 4 input.
(See page 19 for more information on input configu-
ration.)

Video Connection Notes:

• When the component video jacks are used, the on-

screen menus are not visible and you must switch
to the standard composite or S-Video input on your
TV to view them.

• The AVR 325 will accept either standard composite,

S-Video or Y/Pr/Pb component video signals.
However, it will not convert composite or S signals
to component video.

• Component and composite video signals may only

be viewed in their native formats.

System and Power Connections

The AVR 325 is designed for flexible use with multi-
room systems, external control components and
power amplifiers.

Main Room Remote Control Extension

If the receiver is placed behind a solid or smoked
glass cabinet door, the obstruction may prevent the
remote sensor from receiving commands. In this
event, an optional remote sensor may be used.
Connect the output of the remote sensor to the

Remote IR Input

jack.

If other components are also prevented from receiving
remote commands, only one sensor is needed. Simply
use this unit’s sensor or a remote eye by running a
connection from the

Remote IR Output

jack to

the Remote IR Input jack on Harman Kardon or other
compatible equipment.

Multiroom IR Link

The remote room IR receiver should be connected to
the AVR 325 via standard coaxial cable. Plug the IR con-
nection cable into the

Multiroom IR Input

jack on

the AVR 325’s rear panel.

If other Harman Kardon compatible source equipment
is part of the main room installation, the

Remote IR

Output

jack on the rear panel should be connected

to the IR IN jack on source equipment. This will enable
the remote room location to control source equipment
functions.

NOTE:

All remotely controlled components must be

linked together in a “daisy chain.” Connect the

IR OUT

jack of one unit to the

IR IN

of the next to establish

this chain.

Multiroom Connections

The AVR 325 is equipped with multizone capabilities
that allow it to send a separate audio source to the
remote zone from the one selected for use in the
main room.

Depending on your system’s requirement, three
options are available for audio connection:

Option 1:

Use high-quality, shielded audio intercon-

nect cable from the AVR 325’s location to the remote
room. In the remote room, connect the interconnect
cable to a stereo power amplifier. The amplifier will be
connected to the room’s speakers. At the AVR 325,
plug the audio interconnect cables into the

Multiroom

Audio Output

jacks on the AVR 325’s rear panel.

Option 2:

Connect the

Multiroom Audio Output

jacks on the AVR 325 to the inputs of an optional
stereo power amplifier. Run high-quality speaker wire
from the amplifier to the speakers in the remote room.

Option 3:

Taking advantage of the AVR 325’s built-in

seven-channel amplifier, it is possible to use two of the
amplifier channels to power speakers in the remote
room. When using this option you will not be able to
use the full 7.1-channel capabilities of the AVR 325 in
the main listening room, but you will be able to add
another listening room without additional external
power amplifiers. To use the internal amplifiers to
power a remote zone, connect the speakers for
the remote room location to the

Surround Back/

Multiroom Speaker Outputs

‚

. Before using the

remote room you will need to configure the amplifiers
for surround operation by changing a setting in the
Advanced Select menu, following the instructions
shown on page 32.

NOTE:

For all options, you may connect an optional IR

sensor in the remote room to the AVR 325 via an
appropriate cable. Connect the sensor’s cable to the

Multiroom IR Input

on the AVR 325 and use the

Zone II remote to control the room volume. Alter-
natively, you may install an optional volume control
between the output of the amplifiers and the speakers.

A-BUS

Installation Connections

The AVR 325 is among the very few receivers avail-
able today that offer built-in A-BUS Ready

operation.

When used with an optional A-BUS keypad or control
module, you have all the benefits of remote zone
operation without the need for an external power
amplifier.

To use the AVR 325 with an approved A-BUS prod-
uct, simply connect the keypad or module that is in
the remote room to the AVR 325 using standard
Category 5 wiring that is properly rated for the in-wall
use specific to the installation. Terminate the wiring
at the receiver end to a standard RJ-45 jack in
compliance with the instructions furnished with the
A-BUS module.

No further installation or adjustment is needed, as the
A-BUS connector on the AVR 325 routes the signals
in and out of the keypad to their proper destination for
power, signal source and control. The output fed to the
A-BUS jack is determined by the AVR 325’s multi-
room system, and the menus may be used as is.

RS-232 Connections

The AVR 325 includes an RS-232 serial port connec-
tion that may be used to control the unit via compati-
ble optional, external keypads or control systems. The
physical connection to the AVR 325 from the control
device is a standard D-9 connection, but to ensure
compatible and proper operation, specific software
commands and pin wiring schemes are required.
Due to the complexity of RS-232 connections,
we recommend that they be made only by trained
installers familiar with their use. To obtain additional
information on the use of the AVR 325 with RS-232
control, please contact Harman Kardon’s customer
service department or consult our Web site at
www.harmankardon.com.

AC Power Connections

This unit is equipped with two accessory AC outlets.
They may be used to power accessory devices, but
they should not be used with high-current-draw equip-
ment such as power amplifiers. The total power draw
to each outlet may not exceed 100 watts.

The

Switched AC Accessory Outlet

⁄

will receive

power only when the unit is on. This is recommended
for devices that have no power switch or a mechanical
power switch that may be left in the “ON” position.

NOTE:

Many audio and video products go into a

Standby mode when they are used with switched out-
lets, and cannot be fully turned on using the outlet
alone without a remote control command.

The

Unswitched AC Accessory Outlet

will

receive power as long as the unit is plugged into a
powered AC outlet.

AVR325