manualshive.com logo in svg

Harman Kardon AVR 2600, Руководство пользователя

Поделиться
Скачать
Harman Kardon AVR 2600 Скачать руководство пользователя страница 53

53

APPENDIX

Table A12 – 

continued

Surround Mode

Description

Incoming Bitstream or Signal

DTS Neo:6 

Depending on the number of speakers in your system, select 3-, 5- or  

• DTS 2/2/.0 or .1, 3/2/.0 or .1  

Cinema

6-channel modes, enhanced for movie or video presentations.

• DTS 96/24
• Analog (2-channel) 
• PCM (32kHz, 44.1kHz or 48kHz)

DTS Neo:6 

Available only in 5- and 6-channel modes, creates a surround presentation  • DTS 2/2/.0 or .1, 3/2/.0 or .1 

Music

suitable for music recordings.

• DTS 96/24
• Analog (2-channel)  
• PCM (32kHz, 44.1kHz or 48kHz)

Logic 7

A Harman International proprietary technology, Logic 7 technology enhances  

See below

Mode Group

2-channel and matrix-encoded recordings by deriving separate information   
for the surround back channels. This provides more accurate placement of   
sound, improves panning and expands the sound field, even when used   
with 5.1-channel systems. Logic 7 technology uses 96kHz processing, and    
is available in 5.1-or 7.1-channel modes. Three variants are available.

Logic 7 

Especially suited to 2-channel sources containing Dolby Surround or matrix

• Analog (2-channel)  

Movie

encoding, Logic 7 Movie mode increases center channel intelligibility.

• Tuner
• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

Logic 7 

The AVR 2600 is programmed at the factory to default to this mode for 

• Analog (2-channel)  

Music

2-channel signals. Logic 7 Music mode is well suited to conventional 

• Tuner

2-channel music recordings.

• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

Logic 7 Game

Use Logic 7 Game mode to enhance enjoyment of video game consoles.

• Analog (2-channel)
• Tuner
• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

5-Channel Stereo

Useful for parties, the left- and right-channel information is played  

• Analog (2-channel)  

through both the front and surround speakers on each side, while the  

• Tuner

center speaker plays a summed mono mix.

• PCM (32kHz, 44.1kHz or 48kHz, 96kHz, 192kHz)

7-Channel Stereo

Expands the 5-Channel Stereo presentation to include the surround back 

• Analog (2-channel)

channels.

• Tuner
• PCM (32kHz, 44.1kHz or 48kHz, 96kHz, 192kHz)

2-Channel Stereo

Turns off all surround processing and plays a pure 2-channel signal 

• Analog (2-channel; DSP downmix available

or a downmix of a multichannel signal. The signal is digitized and bass

for multichannel)

management settings are applied, making it appropriate when a 

• Tuner

subwoofer is used.

• PCM (32kHz, 44.1kHz, 48kHz, 96kHz)

2-Channel Stereo 

Maintains an analog input signal in that form, bypassing all digital processing

• Analog (2-channel)

(Analog Bypass)

(i.e., surround and bass management). Requires Tone Control setting to be off.

• Tuner

AVR 2600 OM.qxd  4/29/09  12:11 PM  Page 53

Содержание AVR 2600
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды