Harman Kardon AVR 245 Скачать руководство пользователя страница 6

Страница: 6 / 76

INTRODUCTION

Audio Inputs

• AM/FM/XM

* tuner

• CD

• Tape

• 6-/8-Channel direct

•

/DMP for iPod

** connectivity

Audio/Video Inputs (With S-Video)

• Video 1

• Video 2

• Video 3

• Video 4

• DVD

• Three assignable 100MHz component video inputs

• HDMI

™

1 and 2 (Switching only)

Digital Audio Inputs

• Coaxial: two rear-panel/one front-panel

• Optical: two rear-panel/one front-panel

Outputs

• 7.1-Channel preamp outputs

• Tape (analog audio)

• Video 1 (analog audio and video)

• Video monitor (composite, S-video and component)

• Digital audio (one coaxial, one optical)

• HDMI (switching only)

• Multiroom audio, speaker- and line-level (shared with surround back

channels)

• Headphone

Ease of Use

• EzSet+

automated setup (microphone supplied)

• On-screen display with composite and S-video; choice of blue or

black background

• Two-line dot-matrix front-panel display

• Color-coded connections

• Programmable 11-device main remote control

• Source input renaming

• A/V Sync Delay

• RS-232 serial port for system upgrades

• Switched accessory power outlet

• Remote infrared (IR) input and output

• Multiroom IR input

Supplied Accessories

The following accessory items are supplied with the AVR 245. If any
of these items are missing, please contact Harman Kardon customer
service at www.harmankardon.com.

• System remote control

• EzSet+ microphone with extender rod

• AM loop antenna

• FM wire antenna

• Three AAA batteries

• Two covers for front-panel jacks

The

Bridge

*XM antenna module and subscription to XM service required. Hardware and serv-

ice sold separately. XM service is not available in Alaska or Hawaii.

**Compatible with all iPod models equipped with a dock connector. Not compatible

with iPod shuffle

™

models. Although iPod photo and video models are compatible,

images and videos stored on the iPod may not be viewed.

HKP1477AVR245om 8/29/06 5:45 PM Page 6

Содержание AVR 245












































































Результаты поиска

Содержание AVR 245

Отзывы:

Бренды по названию

Популярные бренды

Harman Kardon AVR 245, Руководство пользователя

Результаты поиска

Содержание AVR 245

Отзывы:

Бренды по названию

Популярные бренды