Harman Kardon AVR 1650, Руководство пользователя

Страница: 15 / 56

15
AVR 1650/AVR 165
ENGLISH
Making Connections, continued
Audio recorders
Connect an analog audio recorder’s inputs to the AVR’s analog audio Tape Out connectors.
You can record any analog audio input signal.
Stereo Audio Cable
(not supplied)
To Stereo Analog
Record Inputs
Analog Recording Device
AVR Analog Audio
Recorder Connectors
You can connect the AVR’s Optical Digital Output connector to a digital audio recorder’s
optical digital input connector. You can record both coaxial and optical digital input
signals.
Optical Digital Audio
Cable (not supplied)
To Optical Digital
Record Input
Digital Recording Device
Digital Audio
Recorder Connector
Video recorders
Connect an analog video recorder’s video input connector to the AVR’s Video 2 Out
Composite Video connector, and its audio input connectors to the AVR’s Video 2 Out
Analog Audio connectors. You can record any composite video signal.
Analog Audio/Video
Cable (not supplied)
To Analog Audio/
Video Record Inputs
Analog Video
Recording Device
AVR Analog
Audio Connectors
AVR Analog
Video Connectors
Connect The Bridge IIIP
Connect an optional The Bridge IIIP to the AVR’s The Bridge IIIP connector. Insert the plug
until it snaps into place in the connector.
IMPORTANT: Connect The Bridge IIIP only
with the AVR’s power turned OFF.
AVR The Bridge IIIP
Connector
The Bridge IIIP
Connect the Radio Antennas
Connect the supplied FM antenna to the AVR’s FM 75
s 1
Radio Antenna connector. For
the best reception, extend the FM antenna as far as possible.
Bend and fold the base of the supplied AM antenna as shown and connect the antenna s
wires to the AVR’s AM and Gnd connectors. (You can connect either wire to either
connector.) Rotate the antenna as necessary to minimize background noise.
AVR Radio Antenna
Connectors
FM Antenna (supplied)
AM Antenna
(supplied)
Bend and fold base
Connect IR Equipment
The AVR’s Remote IR Input and Output connectors let you remotely control the AVR in a
variety of situations:
When you place the AVR inside a cabinet or facing away from the listener, connect an
s
external IR receiver, such as the Harman Kardon HE 1000 (available separately), to the
AVR’s IR Remote In connector.
AVR IR Remote
In Connector
External IR
Receiver
AVR and Source
Devices Installed
Inside of Cabinet
If any source devices are equipped with a compatible IR input connector, use a 1/8-
s
inch (3.5mm) mini-plug interconnect cable (not included) to connect the AVR’s IR
Remote Out jack to the source device’s IR input connector.
External IR Receiver
AVR 1650/AVR 165
Source Devices
w/Remote
In/Out Jacks
Mono 1/8-inch
(3.5mm) Mini-
Plug Interconnect
(not supplied)
To control more than one source device through the AVR’s IR Remote Out connector,
connect all sources in “daisy chain” fashion, connecting each device’s IR output
connector to the next device’s IR input connector, starting with the AVR.