background image

TECHNICAL SPECIFICATIONS  4

Audio Section

Stereo Mode 
Continuous Average Power (FTC)

55 Watts per channel, @ < 0.07% THD, 20Hz – 20kHz,
both channels driven into 8 ohms

Five-Channel Surround Modes 
Power Per Individual Channel

Front L&R channels:
45 Watts per channel
@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:
45 Watts @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround channels:
45 Watts per channel
@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Pro Logic II 

45dB

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response 

@ 1W (+0dB, –3dB)

10Hz– 100kHz

High Instantaneous 
Current Capability (HCC)

±25 Amps

Transient Intermodulation 
Distortion (TIM)

Unmeasurable

Slew Rate

40V/µsec

FM Tuner Section

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70dB/68dB

Distortion

Mono/Stereo 0.2%/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

Frequency Range

520 –1710 kHz

Signal-to-Noise Ratio

45 dB

Usable Sensitivity

Loop 500 µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±10kHz, 30dB

Video Section

Television Format

NTSC

Input Level/Impedance

1Vp-p /75 ohms

Output Level/Impedance

1Vp-p /75 ohms

Video Frequency 
Response

10Hz–8MHz (–3dB)

General

Power Requirement

AC 125V/60Hz

Power Consumption

68W idle, 540W maximum 
(2 channels driven)

Dimensions 

Width

17.3 inches (440mm)

Height 6.6 inches (168mm)
Depth 15.4 inches (390mm)

Weight 23.8 lb (10.8kg)

Depth measurement includes knobs, buttons and terminal connections.
Height measurement includes feet and chassis.
All features and specifications are subject to change without notice.

Harman Kardon is a registered trademark, and Power for the Digital Revolution is a trademark,
of Harman Kardon, Inc.

*

Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic II, AC-3 and the Double-D symbol are
trademarks of Dolby Laboratories. Confidential Unpublished
Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround are registered trademarks of Digital Theater Systems, Inc.

UltraStereo is a trademark of UltraStereo Corp.

VMAx is a registered trademark of Harman International Industries, Inc., and is an 
implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Lexicon, Inc., a Harman International Company.

Crystal is a registered trademark of Cirrus Logic Corp.

4

AVR125

 

 

 

 

 

 

            

 

 

 

harman/kardon 

Содержание AVR 125









Отзывы: