Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [email protected]
DocID: 528046_17.05.2022
PowerPlant Po mk2
EN
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do
not just dispose of these materials with your normal household waste,
but make sure that they are collected for recycling. Please follow the
notes and markings on the packaging.
Batteries must not be disposed of as domestic waste or thrown into
fire. Dispose of batteries according to national or local regulations re-
garding hazardous waste. Dispose of empty batteries at appropriate
collection sites. Dispose lithium batteries only in discharged condition.
Remove replaceable lithium batteries from the device before disposal.
Protect used lithium batteries from short circuits, for example by cov-
ering the poles with adhesive tape. Permanently installed lithium bat-
teries must be disposed of together with the device. Please inquire
about a suitable acceptance point.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dis-
pose of your old device with your normal household waste. Dispose of
this product through an approved waste disposal firm or through your
local waste facility. Comply with the rules and regulations that apply in
your country. If in doubt, consult your local waste disposal facility.
Connections and operating elements
ö
Blue LEDs; indicate which output voltage has been chosen
#
Button to choose the output voltage
$
Button to turn on and off the device by pressing it for 5 seconds
%
Green LEDs; indicate the charging status of the battery;
blink during charging the battery.
&
DC output socket for connecting the devices to be charged with the
output voltage to be chosen
'
USB-C port for charging the built-in battery of the PowerBank and for
charging smartphones and tablets
(
DC output sockets for connecting the devices to be charged at
9 V output voltage
PowerPlant
Po MK2
5
1
4
5
6
7
8
2
3
9(adj)
10
$
&
%
ö
#
'
(
Technical specifications
• Output voltage
1 × 9 / 12 / 15 / 18 V @ max. 500 mA
8 × 9 V @ max. 500 mA
• Operating voltage
5 V
, 3 A / 9 V
, 2 A / 12 V
, 1.5 A
via USB-C port (max. 18 W)
• Battery
Type
Lithium ions
Voltage 3.7 V
Capacity
92.5 Wh / 25,000 mAh
Charging time
approx. 7 hours @ 18 W
• Dimensions (W × H × D)
140 mm × 43 mm × 106 mm
• Weight
707 g
• Ambient conditions
Temperature range 0 °C...40 °C
Relative humidity
20 %...80 %
(non-condensing)
