5
Radial Winch
40.2 ST
Installation and Maintenance Manual - Mod.D
The winch can be installed following one of the two procedures below (
Procedure1
or
Procedure 2
):
Procedure 1
To install the winch you must remove the drum and use Socket Head (SH) bolts.
Tools needed
One medium flat-bladed screwdriver
To identify the various parts, refer to the exploded view at the end of this Manual.
Torque to apply when assembling
1. Unscrew the central screw ( 2Nm/18 in-lb)
2. Slide off the assy socket n°28 and the cover
n°29
3. Unscrew the three screws n°27
( 4Nm/35 in-lb)
4. Remove the self-tailing arm n°26 by rotating
and lifting it.
