Harken POWERSEAT PWRS-G, Инструкция по эксплуатации

Страница: 19 / 44

25-05-18 ENGLISH 19
powerseat pWrs-G
WARNING!
Take at least two turns of the
rope around the winch drum,
and if it slips under load
increase the number of turns
to a maximum of four, taking
care not to overlap the rope.
7. Wind the rope clockwise around the winch
drum.
NOTE!
The number of turns needed round the winch drum depends on the load and the condition of the rope.
Check the device's descending capacity in its working configuration.
Before use ascend with the device, no more than 1 mtr (3,28 ft) and check, according to the descent procedure 1,
that it's descending smoothly.
In case of difficulties unwind the rope, and reduce the turns to not less than 2 wraps, until you have the optimal
configuration.
8. Pass the rope over the stripper arm.
9. Fit the rope into the rope grab. Raise the
cover to make this easier.
10. Position the rope inside the stopper.
11. Close the protective cover with the strap.