Harken PowerSeat PWRS-E, Инструкция по эксплуатации

Страница: 25 / 54

01-30-14 ENGLISH 25
PowerSeat PWRS-E
1. Untight the first screw of the accelerator
control using an hex key n°4.
uSInG thE dEvICE - AdjuStInG thE ACCElERAtoR ContRol PoSItIon
Before using the device verify the position of the accelerator control so that it is ergonomically comfortable for
the operator, depending on the use that is expected.
2. Completely untight the second screw of the
accelerator control using an hex key n°4, pay
attention to not lose the self-locking nut.
Verify the functionallity of the anti-panic
system:
push the accelerator lever to start the
device, and push further the accelerator
lever up to the stop, and verify the stop of
the device.
Release the accelerator lever to disarm the
anti-panic system.
NOtE!
Before every use carry out a function check with the device unloaded to check for any problems
with the engine.
Verify the functionallity of the emergency
button, pushing the emergency button and
verifying the stop of the device.
Rotate clockwise the emergency button to
rearm the device.